6.8.
Remove the Top Shield Plate.
Figure 15
1. Remove the four screws <F>, and remove the top shield
plate.
Screw <F>: DXSB26+4FZMT
6.9.
Removing the LCD Unit.
Figure 16
1. Disconnect the connectors CN1 and CN16.
2. Remove the three screws <A> and the screw <G>, and
remove the LCD unit.
Screw <A>: XYN26+J4
Screw <G>: DXSN26+25MT
6.10. Removing the SuperDisk Drive
or the FloppyDisk Drive.
1. Release the SDD FPC or the FDD FPC.
2. Remove the screw <S>.
3. Slide out the SuperDisk drive or the FloppyDisk drive.
Screw<S>: XYN2+J4FN
6 - 4
Figure 17
Figure 18