9.2.14. Removing the Hinge Cover
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.13. first.
1. Remove the 2 screws (R) and then remove the
hinge cover (L, R).
Screw (R) : DRHM0108ZA (N1002)
2. Remove the 2 screws (S).
Screw (S) : DRHM0076ZA (N1001)
9.2.15. Removing the LCD Unit and the
LCD Rear
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.13. to 9.2.14. first.
1. Remove the 2 LCD Ruber and then remove the 2
screws (T).
Screw (T) : DXHM0039ZA (N5)
2. Separate the LCD front and the LCD rear.
3. Remove the hinge (L), (R).
9.2.16. Removing the Inverter
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.13. to 9.2.15. first.
1. Remove the LCD cable from the inverter.
2. Peel off the conductive cloth (LCD cable) from the
inverter.
3. Peel off the inverter tape from the inverter.
Inverter tape : DFHR3A95ZA (K49)
3. Remove the inverter with inverter box.
29