Line Processing Of Antenna Cable Of Main Unit - Panasonic Toughbook CF-19CHBAXBM Service Manual

n Line Processing of Antenna Cable of Main Unit
Cable Process 1/3
Cable Process 2/3
Step 5
Audio PCB Ass'y
Insert the FPC,
Lock Check
0 2mm
Tape
2 5mm
After processing the cables, inserting the FPC and locking,
incline the Audio PCB into the arrow direction.
Step 6
Screw
Fix the Ausio PCB
Step 1
Place brown/blue/gray cables at left and
white/black cables downward.
Step 2
After connecting the white antenna cable,
connect it into the Holder as illustrated.
Step 7
Sheet
Remove the Release Paper
and attach it.
To prevent from the cable
damage by screw head.
Step 8
Screw
Screw
Connect the gray antenna cable.
Step 3
Put the surplus under along the rib.
Step 4
Cable
Step 9
Connect the blue antenna cable.
Attach Side
0 1mm
Step 10
0 1mm
Screw
Step 11
Sheet
Remove the Release Paper
and attach it.
To prevent from the cable
damage by screw bead.
9-32
After connecting the black antenna cable,
connect it into the Holder as illustrated.
After connecting the gray antenna cable,
connect it into the Holder as illustrated.
Insert it into the right
notch of the Clamper.
Check the blue cable from the hole.
Screw
Screw
Screw
Connect the FPC
Attach Side
0 1mm
0 1mm