Assembly Of Lcd Front Case - Panasonic Toughbook CF-19CHBAXBM Service Manual

9.2.5. Assembling the Antenna Cover, the Tablet Latch Cover and the LCD Rear Case
1. Fix the LCD Rear Case using the 10 Screws <N15> and
the 2 Screws. <N16>
2. Attach the Antenna Covers and the Tablet Latch Cover to
the Display Unit.
3. Tighten the 8 Screws <N7> on the back of the Display
Unit.
4. Turn the Display Unit over, and tighten the 8 Screws.
<N7>
Screws <N7> : DRQT26+E5FKL
Screws <N15> : DXYN2+J6FNL
Screws <N16> : DXYN3+J10FNL
n Assembly of LCD Front Case
LCD Front Assy
Do not use if the protrusion such as painting lump exists around D5.
(Due to affect the Touch Screen operations.)
Avoid running over
Tape
Note for attachment
Avoid running over the display part.
Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).
Attach here Position of pasting D.
0 0.5mm
0 0.5mm
<N15>
<N15>
<N15>
<N15>
Antenna Cover
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
Tablet Latch Cover
Insert it between the ribs, and attach it.
Magnet Ass'y
0 0.5mm
Magnet Tape
0 1mm
Magnet
1mm (Both on the top and the side)
9-16
<N15>
<N16>
LCD Rear Case
<N16>
<N15>
<N15>
<N15>
<N15>
<N15>
<N7>
<N7>
<N7>
Antenna Cover
<N7>
Avoid running over
Fit to the rib
0 0.5mm