Creating A Backup Archive; Restoring Data; Using Windows Recovery Environment - Motion Computing J3400 User Manual

Creating a backup archive

If you want to roll back your tablet to a predetermined state, you can create a backup
archive.
To create a complete PC backup archive
1. From the Control Panel, tap the System and Security category, then tap Backup and
Restore.
2. Tap Create a system image in the left navigation bar, then follow the instructions.
Note: You will need an external USB hard disk drive or DVD drive attached to store the
backup copy.
To back up individual files
1. From the Control Panel, tap System and Security category, then tap Backup and
Restore.
2. Tap Set up back up.
3. Follow the instructions to back up selected files to protect against loss or accidental
deletion.

Restoring data

If you experience a problem, you can use the Windows Recovery Environment to repair your
Windows 7 files, or you can restore your computer to the state it was in when it left the
factory. If a serious problem occurs and Windows 7 will not restart, the Windows Recovery
Environment Repair will automatically start. Additionally, you can create your own backup
data archives and restore those later. For more information, see "Creating a backup archive"
on page 69.

Using Windows Recovery Environment

When using the Windows Recovery Environment, you will need a keyboard connected to
the tablet.
To repair Windows 7 files
1. After your tablet restarts after the initial BIOS display screen, press and hold the F8 key.
2. On the Advanced Boot Options screen, select Repair your computer and press the
Enter key.
3. Select a keyboard layout and click Next.
4. Select a user name and enter the password, and then click OK.
5. On the System Recovery Options menu, click Startup Repair.
Chapter 4 Care and Maintenance 69