Security Slot; Vga Port; Ethernet Port; Docking Connector - Motion Computing J3400 User Manual

Security slot

You can use the security slot to attach your tablet to a desk, table or other fixture. You must
purchase a security lock separately.

VGA port

You can use the VGA port to connect standard VGA monitors. When you attach an external
monitor, you can use the external monitor only, or the external monitor and the Tablet PC
display together. See "Setting up an external display" on page 36.

Ethernet port

The J3400 comes with an integrated 10/100/1000 Base-T Ethernet port (RJ-45), which you
can use to connect to an Ethernet network or another computer.
For more information, see "Using Ethernet" on page 32.

Docking connector

The J3400 has a docking port that you can use to connect the tablet to the Motion
FlexDock. When the tablet is connected to the FlexDock, the port connections are
replicated on the dock. This enables you to connect a monitor, keyboard, mouse, or external
drive to the dock and easily dock and undock the tablet. For more information about the
FlexDock and other accessories, go to the Motion Computing accessories page at
www.motioncomputing.com/accessories.

Smart card reader slot (optional)

Your tablet includes a smart card reader located on the right side of the tablet, under the
card slots cover, next to the pen bay. Using smart card software, this device can read
information from and write information to the smart card when the card is inserted into the
slot. The smart card is an ISO 7816 PC/SC compliant, contact type smart card reader/writer.
For information about using the smart card reader, see "Using the smart card reader
(optional)" on page 34.
Chapter 2 Features 19