Removing The Display Assembly - Dell Latitude X300 Service Manual

Hinge Covers and Display Assembly: Dell Latitude X300 Service Manual
NOTE: The back of each hinge cover has a tab that snaps into a slot on the back of the
computer.
Display Assembly

Removing the Display Assembly

CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions in the System Information Guide.
NOTICE: Disconnect the computer and any attached devices from electrical
outlets.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an
unpainted metal surface on the computer.
NOTICE: Read
procedure.
1. Remove the battery.
2. Remove the keyboard.
3. Turn the computer over, and remove the two M3 x 5-mm screws from the bottom of the
computer.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X300/x300_SERVICE_MANUAL/display.htm (3 of 7)6/21/2004 3:06:26 AM
"Before You Begin" before performing the following