Replacing The Palm Rest - Dell Latitude X300 Service Manual

Palm Rest: Dell Latitude X300 Service Manual
1 palm-rest flex cable
2 ZIF connector
3 palm rest
8. Lift the palm rest up and out of the computer.

Replacing the Palm Rest

To aid with proper flex cable connection, a locator line has been added near the end of the palm-rest
flex cable. When replacing the palm-rest flex cable, press the cable into the connector until the line
aligns with the system board and hold it steady while you snap the ZIF connector down. (The locator
line may reappear after the connector is closed, which should not indicate a problem with the
connection.)
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/X300/x300_SERVICE_MANUAL/palmrest.htm (4 of 5)6/21/2004 3:06:24 AM