Replacing The Reserve Battery - Dell Latitude X200 Service Manual

Reserve Battery: Dell Latitude X200 Service Manual
1 reserve battery cable
2 system board connector
3 reserve battery connector
4 reserve battery
5. Pry the reserve battery free from the bottom case. The reserve battery is attached to the
bottom case with a piece of adhesive tape.
6. Remove any remnants of the adhesive tape from the bottom case.

Replacing the Reserve Battery

1. Connect the reserve battery connector to the system board connector.
2. Press the reserve battery into place on the bottom case.
3. Update the BIOS using a flash BIOS update program. For instructions on how to flash the BIOS,
see "Flashing the
Back to Contents Page
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/X200/X200_SERVICE_MANUAL/rsrvbatt.htm (2 of 3)6/21/2004 3:03:17 AM
BIOS."