Replacing The Reserve Battery - Dell Latitude X200 Service Manual

Reserve Battery: Dell Latitude X200 Service Manual
1 reserve battery cable
2 system board connector
3 reserve battery
connector
4 reserve battery
5. Pry the reserve battery free from the bottom case. The reserve battery is
attached to the bottom case with a piece of adhesive tape.
6. Remove any remnants of the adhesive tape from the bottom case.

Replacing the Reserve Battery

1. Connect the reserve battery connector to the system board connector.
2. Press the reserve battery into place on the bottom case.
3. Update the BIOS using a flash BIOS update program. For instructions on how to
flash the BIOS, see
file:///F|/Service%20Manuals/Dell/Latitude/x200/rsrvbatt.htm (2 of 3) [2/28/2004 8:24:02 AM]
"Flashing the BIOS."