Recommended Tools; Computer Orientation - Dell Latitude X200 Service Manual

Before You Begin: Dell Latitude X200 Service Manual
9. Close the display and turn the computer upside down on a flat work surface.
NOTICE: To avoid damaging the system board, you must remove the battery before you
service the computer.
10. Remove the battery from the battery bay.
11. To dissipate any static electricity while you work, use a wrist grounding strap or periodically
touch an unpainted metal surface.
12. Handle components and cards with care. Do not touch the components or contacts on a card.
Hold a card by it edges or by its metal mounting bracket. Hold a component such as a
microprocessor by its edges, not by its pins.

Recommended Tools

The procedures in this manual require the following tools:
#1 magnetized Phillips screwdriver
¼-inch flat-blade screwdriver
Small plastic scribe

Computer Orientation

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ok/Latitude/X200/X200_SERVICE_MANUAL/begin.htm (2 of 6)6/21/2004 3:03:08 AM