Table of Contents
Advertisement
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 28. Screw list
Component
Base cover
Battery
M.2 2230/2280 solid-state
drive
Wireless-card bracket
Fan
Heat sink - integrated
Heat sink - discrete
34
Working inside your computer
Screw type
● M2x5
● Captive screw
NOTE:
Screws are
part of the base
cover.
M2x3
M2x2
M2x3.5
M2x5
Captive screw
NOTE:
Screws are
part of the integrated
heat sink.
● Captive screw
NOTE:
Screws
are part of the
discrete heat sink.
● M2x3
Quantity
● 6
● 2
● 3-cell battery: 3
● 4-cell battery: 4
1
1
2
4
● 4
● 3
Screw image
●
●
●
●
Advertisement
Table of Contents
