Clarion DXZ776USB Owner's Manual page 30

Operations Common to Each Mode
Setting the dimmer control
You can set the dimmer control "HIGH", "MID",
"LOW" or "OFF".
The factory default setting is "MID".
2-1. Select "DIMMER".
3-1. Push the [P.CH] button upward or
downward to select the setting.
"HIGH" "MID"
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
The factory default setting is "OFF".
2-1. Select "BLINK LED".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".
Setting the external amplifier
The factory default setting is "OFF".
2-1. Select "AMP CANCEL".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
Setting the car speaker output for the
cellular phone
When the AUX input cable is used to connect a
AUX BLUETOOTH BB (BLT370) (sold
separately).
The factory default setting is "L".
To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select "TEL-SPEAKER".
3-1. Push the [P.CH] button upward or
downward to select "R" or "L".
• R:
Telephone calls can be heard on the front
right speaker connected to this unit.
• L:
Telephone calls can be heard on the front
left speaker connected to this unit.
28
DXZ776USB
"LOW" "OFF"
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
When the AUX input cable is used to connect a
AUX BLUETOOTH BB (BLT370) (sold
separately).
The factory default setting is "OFF".
2-1. Select "TEL-SWITCH".
3-1. Push the [P.CH] button upward or
downward to select the setting in the
following order:
"OFF" "ON"
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
When listening to your calls on your car
speakers, you can adjust the volume by
pushing the [P.CH] button upward or
downward.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
Performing a system check
2-1. Select "SYSTEM CHECK".
3-1. Press and hold the [
second or longer.
"SYSTEM CHECK" appears in the display,
then the unit returns to the speaker system
selecting mode.
"MUTE"
] button for 1