Switching The Display; Adjusting The Volume - Clarion DXZ776USB Owner's Manual

Basic Operations
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [SRC] button.
The mode that was previous active is
displayed.
2. Press and hold the [SRC] button for 1
second or longer to turn off the power for the
unit.
Selecting a mode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio CD/MP3/WMA/AAC
(iPod BB) (CD changer)
(TV) AUX Radio...
External equipment not connected with
CeNET is not displayed.

Adjusting the volume

1. Push the [VOL] button upward or downward
to adjust the volume.
The volume level is from 0 (minimum) to 33
(maximum).

Switching the display

Press and hold the [TITLE] button for 1 second
or longer to select the desired display.
1. Each time you press and hold the [TITLE]
1. Each time you press the [TITLE] button, the
Mute
Use this function to turn off the sound
immediately.
1. Press the [
USB
2. Press the [
(DVD changer)
When the power is turned on
button for 1 second or longer, the display
switches in the following order:
Action display Title display
display Action display...
When the power is turned off
clock time appears or disappears in the
display.
] button.
The sound turns off and "MUTE" blinks in the
display.
] button again to cancel the
mute mode.
Clock time
11
DXZ776USB