Clarion DXZ776USB Owner's Manual page 19

Basic Operations
Setting the X-OVER
This function allows you to adjust the speaker
setting such as cutoff frequencies or slope
matched to the speakers you are using.
(Crossover).
2-1. Select "X-OVER".
3-1. Press the [
3-2. Push the [SEEK PANEL] leftward or
rightward and select from:
3WAY mode
• HIGH
(Front speaker (high))
• HPF
(High pass filter)
• HPF SLOPE
(HPF slope)
• PHASE
(Phase)
• MID
(Front speaker (mid))
• LPF
(Low pass filter)
• LPF SLOPE
(LPF slope)
• HPF
• HPF SLOPE
2WAY mode
• HIGH
(Front speaker (high))
• HPF
(High pass filter)
• HPF SLOPE
(HPF slope)
• PHASE
(Phase)
• MID
(Front speaker (mid))
• LPF
(Low pass filter)
• LPF SLOPE
(LPF slope)
• HPF
• HPF SLOPE
3-3. Push the [P.CH] button upward or
downward to adjust the "HPF", "HPF
SLOPE", "PHASE", "LPF" and "LPF
SLOPE".
] button.
• PHASE
• SUB-W
(Subwoofer)
• LPF
• LPF SLOPE
• HPF
• HPF SLOPE
• PHASE
• HIGH
• PHASE
• REAR
(Rear speaker)
• LPF
• LPF SLOPE
• HPF
• HPF SLOPE
• PHASE
• HIGH
HIGH
Items Adjustable
range
HPF THRGH
(through), 25
Hz to 20 kHz
HPF SLOPE –6 dB, –12 dB,
–18 dB
PHASE NOR (normal),
REV (reverse)
MID
Items Adjustable
range
LPF 630 Hz to 10
kHz, THRGH
(through)
LPF SLOPE –6 dB, –12 dB,
–18 dB
HPF THRGH
(through), 25
Hz to 10 kHz
HPF SLOPE –6 dB, –12 dB,
–18 dB
PHASE NOR (normal),
REV (reverse)
SUB-W (3WAY)/REAR (2WAY)
Items Adjustable
range
LPF 25 Hz to 10
kHz, THRGH
(through)
LPF SLOPE –6 dB, –12 dB,
–18 dB
HPF THRGH
(through), 16
Hz to 250 Hz
HPF SLOPE –6 dB, –12 dB,
–18 dB
PHASE NOR (normal),
REV (reverse)
3-4. Press the [
memory.
Initial value
2 kHz
–12 dB
NOR (normal)
Initial value
2 kHz
–12 dB
THRGH
(through)
–12 dB
NOR (normal)
Initial value
80 Hz
–12 dB
THRGH
(through)
–12 dB
NOR (normal)
] button to store into
17
DXZ776USB