Kenmore 665.60682 Use & Care Manual page 12

CONTROL PANEL FEATURES
(CONT.)
17. CLOCK. Touch this pad to enter the correct
time of day.
18. KITCHEN TIMER. Touch this pad to set or can-
cel the Kitchen Timer.
19. Number pads. Touch Number pads to enter
cooking times, cook powers, quantities, weights,
or food categories.
20. COOK TIME. Touch this pad followed by
Number pads to set a cooking time.
21. POWER. Touch this pad after the cooking time
has been set, followed by a Number pad to set
the amount of microwave energy released to
cook the food. Also touch this pad to lengthen
or shorten a preset cooking time.
22. TURNTABLE ON/OFF. Touch this pad to turn
your turntable on and off.
23. START/ENTER. Touch this pad to start a func-
tion.
24. OFF/CANCEL. Touch this pad to erase an
incorrect command, cancel a program during
cooking, or to clear the display.
25. (Exhaust Fan) ON/OFF. Touch this pad
to turn the fan on or off.
26. 5 FAN SPEEDS. Touch the "up" pad to increase
fan speed and the "down" pad to decrease fan
speed.
27. (Light) ON/NIGHT/OFF. Touch this pad to turn
the light or night light on or off.
NOTES:
• if you have entered all settings for a function but
do not touch START/ENTER in 5 seconds, the
START? indicator light will show.
• if you open the door while the oven is on and
then shut the door, the START? indicator light will
show. Touch START/ENTER to continue.
• if you choose a function but do not touch another
command pad within 1 minute, the display returns
to the time of day and you have to start over.
Your microwave oven comes with audible
signals that can guide you when setting and using
your oven:
• _ A programming tone will sound each time
you touch a pad.
• [_ One long tone signals the end of a Kitchen
Timer countdown.
• I1"1)) I1"1)) I
Four tones signal the end of
a
cooking cycle.
F_1_7 F _7
• I'_l) II"JJJ I Two quick, short tones sound once
every minute for the first 15 minutes after an end-
of-cooking signal as a reminder if the food has
not been removed from the oven.
• I_1_ Two quick, short tones will sound while
entering and exiting from a hidden feature (for
example, Child Lock).
• I -I1"1)) I1"1)) I
Three tones sound if you have
made an incorrect entry.
To disable the programming tone:
TOUCH
and hold for 5 seconds
To turn the programming tone back on:
TOUCH
and hold for 5 seconds
To disable all audible signals except the
end-of-timer signal:
TOUCH
and hold for 5 seconds
To turn signals back on:
TOUCH
and hold for 5 seconds
NOTE: Two tones will sound when audible signals
are turned on or off. This will only work when the
oven is in standby mode.
12