Removing The Cfp Transceiver - Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Notes

Removing the CFP Transceiver

Figure 8
Removing the CFP Transceiver
The CFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual
Caution
grounding device when handling the CFP transceivers or coming into contact with the modules.
Class 1 laser product. Statement 1008
Warning
Because invisible laser radiation may be emitted from the aperture of the port when no cable is
Warning
connected, avoid exposure to laser radiation and do not stare into open apertures. Statement 70
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note
16
Cabling an Optical CFP Transceiver Module with MPO Connectors
L IN K
Network interface
cable
1
2
L IN K
A C T IV
E
OL-23946-01