Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Notes page 14

Installing the CFP Transceiver
Press firmly on the front of the CFP transceiver with your thumb to fully seat it in the transceiver socket.
Step 5
(See Figure
Figure 5
Gently tighten the two captive installation screws on the transceiver to secure the CFP transceiver in the
Step 6
socket. (See
Figure 6
Reinstall the dust plug into the CFP transceiver's optical bore until you are ready to attach the network
Step 7
interface cable.
Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note
14
5.)
Seating the CFP Transceiver Module in the Socket
Figure 6.)
Securing the CFP Transceiver Module
OL-23946-01