Cisco Unified IP Phone Expansion Module 7915 Manual page 8

Figure 2 Removing the Footstand
Unplug the Cisco Unified IP Phone network and power
Step 1
connections.
Unplug the handset, and unplug the headset if one is
Step 2
attached to the phone.
Turn the Cisco Unified IP Phone over and lay it on a
Step 3
protected flat surface to prevent it from being
scratched.
Locate the two foot pins on the footstand.
Step 4
Use a flat head screwdriver to carefully push on one of
Step 5
the foot pins to release it. Then carefully push on the
other foot pin to release it.
Note
Lift off the footstand and store it separately.
Step 6
8
You may have to lift and hold the
Cisco Unified IP Phone to support it when
pushing the foot pins. When pushing on the
footpins, push away from your body.