Configuring The Server - Cisco UCS C220 M3 User Manual

CONFIGURING the SERVER

Follow these steps to configure the Cisco UCS C220 M3 High-Density SFF Rack Server:
STEP 1 VERIFY SERVER SKU, page 10
■
STEP 2 SELECT CPU(s), page 11
■
STEP 3 SELECT MEMORY, page 13
■
STEP 4 SELECT RAID CONFIGURATION, page 18
■
STEP 5 SELECT HARD DISK DRIVES (HDDs) or SOLID STATE DRIVES (SSDs), page 22
■
STEP 6 SELECT PCIe OPTION CARD(s), page 24
■
STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIES, page 26
■
STEP 8 ORDER POWER SUPPLY, page 29
■
STEP 9 SELECT AC POWER CORD(s), page 30
■
STEP 10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARM, page 33
■
STEP 11 ORDER A TRUSTED PLATFORM MODULE, page 34
■
STEP 12 ORDER CISCO FLEXIBLE FLASH SD CARD MODULE (OPTIONAL), page 35
■
STEP 13 ORDER OPTIONAL USB 2.0 DRIVE, page 36
■
STEP 14 SELECT OPERATING SYSTEM, page 37
■
STEP 15 SELECT OPERATING SYSTEM MEDIA KIT, page 39
■
STEP 16 SELECT OPTIONAL VALUE-ADDED SOFTWARE, page 40
■
STEP 17 SELECT SERVICE and SUPPORT LEVEL, page 41
■
OPTIONAL STEP - ORDER RACK(s), page 45
■
OPTIONAL STEP - ORDER PDU, page 46
■
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
CONFIGURING the SERVER
9