Step 7 Order Optional Network Card Accessories - Cisco UCS C220 M3 User Manual

CONFIGURING the SERVER
STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIES
Copper twinax cables and SFP optical modules may be ordered to support the two-port network cards that
are available with the server.
Choose Optional Twinax Cables
Table 10 lists the copper twinax cables available for the PCIe cards. You can choose cable
lengths of 1, 3, 5, 7, or 10 meters. The two longer cables (7 and 10 meters) are active, which
means that they contain active components within the SFP+ housing to improve signal quality.
Table 10 Available Twinax Cables
Product ID (PID)
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-ACU7M
SFP-H10GB-ACU10M
Approved Configurations
(1) Choose Up to Two Twinax Cables for Each Network Card Ordered
You may choose one or two twinax cables for each network card ordered. The cables can be
■
different lengths; however, you would normally order two cables of equal lengths to connect
to the primary and redundant network switching equipment.
Caveats
The twinax cables listed in
—
—
—
—
—
26 Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
PID Description
10GBASE-CU SFP+ Cable (1 M)
10GBASE-CU SFP+ Cable (3 M)
10GBASE-CU SFP+ Cable (5 M)
10GBASE-CU SFP+ Cable (7 M)
10GBASE-CU SFP+ Cable (10 M)
Table 10
N2XX-ACPCI01 (Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps)
UCS-PCIE-BSFP (Broadcom 57712)
N2XX-AEPCI01 (Emulex OCe10102-F)
N2XX-AIPCI01 (Intel Dual Port Ethernet X520)
UCSC-PCIE-CSC-02 (Cisco VIC 1225 Dual Port 10Gb SFP+ CNA)
can be ordered only for the following PCIe cards: