Cisco UCS C220 M3 User Manual page 7

Capability/Feature
Storage controller
Interfaces
Front Panel
Power subsystem
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
Description
Embedded RAID (3 Gbs)
■
• Embedded SATA-only RAID controller, supporting up to 4 SATA-only
drives (RAID 0, 1, 10)
• ROM5 embedded RAID upgrade, supporting up to 8 SAS/SATA drives
(RAID 0, 1, 10). SAS and SATA drives can be mixed.
• ROM55 embedded RAID upgrade, supporting up to 8 SAS/SATA drives
(RAID 0, 1, 10, 5). SAS and SATA drives can be mixed.
2008M-8i Mezzanine Cards (6 Gbs) - two versions
■
• Cisco UCSC RAID SAS 2008M-8i Mezzanine Card, supporting up to 8
SAS/SATA drives supporting RAID 0, 1, 10, 5, and 50. SAS and SATA
drives can be mixed. This card has a product ID (PID) of
UCSC-RAID-11-C220.
• Cisco UCSC RAID SAS 2008M-8i Mezzanine Card, supporting up to
eight SAS/SATA drives supporting RAID 0, 1, and 10. SAS and SATA
drives can be mixed. This card has a product ID (PID) of
UCSC-RAID-MZ-220.
Plug-in PCIe Cards (6 Gbs)
■
• LSI MegaRAID SAS 9266-8i 8-port plug-in PCIe RAID RAID controller
card (occupies a half-height PCIe slot), supporting RAID levels 0, 1,
10, 5, 6, 50, 60 and up to 8 internal SAS or SATA drives. SAS and SATA
drives can be mixed.
• LSI MegaRAID SAS 9266CV-8i RAID 8-port PCIe plug-in RAID controller
card, supporting RAID 0, 1, 10, 5, 6, 50, and 60 and up to eight
internal SAS or SATA drives. SAS and SATA drives can be mixed.
Rear panel
■
• One RJ45 serial port connector
• Two USB 2.0 port connectors
• One DB15 VGA connector
• Two RJ-45 10/100/1000 Ethernet port connectors
• One RJ-45 10/100/1000 Ethernet management port, using Cisco
Integrated Management Controller (CIMC) firmware
Various PCIe card ports (dependent on which cards are installed)
■
• Converged Network Adapter (CNA) ports
• Network Interface Card (NIC) ports
• Host Bus Adapter (HBA) ports
Front panel
■
• One KVM console connector (supplies two USB, one VGA, and one
serial connector)
A front panel controller provides status indications and control buttons
Up to two 450 W 650 W power supplies. One is mandatory; one more can be
added for 1 + 1 redundancy.
BASE SERVER STANDARD CAPABILITIES and FEATURES
7