Lcd Transmitter Operation ( First Car Control ); Basic Vehicle Operation; Transmitter Mode Selection; Time Or Alarm Clock Adjustments - Autostart AS-6600i TW-FM User Manual

Two-way 6-button lcd automatic transmission remote starter with full alarm system
Table of Contents

Advertisement

LCD Transmitter Operation (

Basic Vehicle Operation

FUNCTION
BUTTON PRESSED
LOCK
UNLOCK
TRUNK or AUX 3
START *
(see Runtime
Options below)
STOP
AUX 2 or STOP
Light ON

Transmitter Mode Selection

FUNCTION
BUTTON PRESSED
POWER-SAVING
(
+
MODE
VIBRATION MODE
+
ALARM CLOCK
+
MODE ON/OFF

Time or Alarm Clock Adjustments

User
1. Press and hold the
FUNCTION
beep is heard
2. Upon hearing the beep, release the
button,
FUNCTION
3. Press and hold the
FUNCTION
more
4. Release the
button when a beep
FUNCTION
is heard,
5. Press and hold the
FUNCTION
more until a beep is heard,
6. Release the
button
FUNCTION
7. At that point, press and hold the
button until 2 beeps are heard.
Pressing the
button
FUNCTION
1X .................................Adjust hour (current time)
2X ........................... Adjust minutes (current time)
3X .......................................... Adjust hour (Alarm)
User Guide
)
First Car Control
ICON
BUZZER
1 Beep
2 Beeps
1 Beep
1 beep before
engine starts
followed by melody
+
when started
None
Melody
AUX 2 = 1 beep...
None
1 beep
STOP = Melody
ON for 5 seconds
ICON
BUZZER
Melody
)
Vibrates 4 times
Melody
button until a
The backlight will turn on the moment the
button is pressed.
FUNCTION
..............................
button once
..............................
button once
..............................
....................... The hour setting will start to
FUNCTION
flash.
4X ..................................... Adjust minutes (Alarm)
5X ....Melody selection for the ringing of the alarm
6X ...........Activate (ON) / Deactivate (OFF) Alarm
INSTRUCTIONS /DESCRIPTION
Locks the doors
and arms the Starter Kill (if
installed) and the alarm.
Unlocks the doors and disarms
the Starter Kill (if installed) and
the alarm.
Trunk output
Starts the engine
Stops the engine
Activates AUX 2 (by default) or
stops the engine (if programmed
as Stop button).
Press the
button once.
INSTRUCTIONS /DESCRIPTION
Press the
button then
UNLOCK
press
and
FUNCTION
LOCK
simultaneously
Press and hold the
and
FUNCTION
buttons simultaneously
LOCK
Press once to switch the Alarm
Clock ON
Press twice to switch the Alarm
Clock OFF
Transmitter
is displayed
is displayed
is displayed
P. 14

Advertisement

Table of Contents
loading

Table of Contents