Intrusion Codes - Autostart AS-6600i TW-FM User Manual

To access a Level 2 feature, press and hold the
the button and press and release the
FUNCTION
displayed. This display means that you are now in Level 2. Simply press the corresponding
button to access the desired feature.
To access a Level 3 feature, press and hold the
the button and press and release the
FUNCTION
displayed. This display means that you are now in Level 3. Simply press the corresponding
button to access the desired feature.
To access the transmitter functions (clock and alarm adjustments), press and hold the
button until you hear a "beep"; within three seconds of hearing the "beep", release the
button and press and release the
"beeps" indicating that you are now in the transmitter functions adjustment menu. The Hour
position will be flashing. Simply press and release the
desired location and proceed with the adjustment by pressing the
Your installer can customize the system as to personalize these multi-level features in an order that
best suits you. Your options are:
Level 1
(requires pressing the
FUNCTION
Level 2
(requires pressing the
FUNCTION
Level 3
(requires pressing the
FUNCTION
Level 1
(requires pressing the
FUNCTION
Level 2
(requires pressing the
FUNCTION
Level 3
(requires pressing the
FUNCTION
Level 1
(requires pressing the
FUNCTION
Level 2
(requires pressing the
FUNCTION
Level 3
(requires pressing the
FUNCTION
Level 1
(requires pressing the
FUNCTION
Level 2
(requires pressing the
FUNCTION
Level 3 (
requires pressing the
FUNCTION
Example: If the multi-level features were set to option 3, the setup would be as follows:
Level 1
Level 2
Level 3
The "Basic features" are now programmed as level 3 and therefore:
To access the aux. 2 features, the user needs to press on the
followed by the button.
LOCK
To access cold weather mode, the user needs to press on the
followed by the button
START/STOP
Note: When using the companion remote, Shift button must be pressed twice quickly the first time.
For instance, to access customized feature 1, press
followed by Lock.
Intrusion Codes through the LED Light
If there has been an intrusion in the vehicle while it was locked and armed, the LED will provide an
intrusion code matching the type of the intrusion that took place. Disarm the alarm (UNLOCK) to
identify the intrusion. The LED intrusion codes are flashed in continuous loops:
2 x = Doors intrusion
3 x = Shock Sense
4 x = Hood
User Guide
button until you hear a "beep, release
FUNCTION
button once more.
FUNCTION
button until you hear a "beep"; release
FUNCTION
button two more times.
FUNCTION
button three more times. There will be two quick
FUNCTION
FUNCTION
Option 1:
Multi car operation
button 1X)
Basic features
button 2X)
Customized features
button 3X)
Option 2:
Basic features
button 1X)
Multi car operation
button 2X)
Customized features
button 3X)
Option 3:
Customized features
button 1X)
Multi car operation
button 2X)
Basic features
button 3X)
Option 4:
Basic features
button 1X)
Customized features
button 2X)
Multi car operation
button 3X)
Customized feature
Multi car operation
Basic features
FUNCTION
FUNCTION
.
twice quickly,
SHIFT
5 x = Panic
6 x = Ignition
7 x = Trunk
will be
will be
FUNCTION
FUNCTION
button until you reach the
or buttons.
START/STOP TRUNK
button three (3) times
button three (3) times
and again
SHIFT SHIFT
P. 12