Alarm Status; How Run Time Cycles Work; Multi-Level Features (Default State) - Autostart AS-6460i TW-FM User Manual

Alarm Status

STATUS SEQUENCE
If door is
Door
opened
If hood is
Hood
opened
If ignition is
Ignition
turned ON
If shock
Shock
activated
If trunk is
Trunk
opened
Remote Valet switch
finder on for 3 sec.

How Run Time Cycles Work

RUN TIME
CYCLE
3-minute run
time cycle
8-minute run
time cycle
15-minute run
time cycle
20-minute run
time cycle
25-minute run
time cycle
30-minute run
time cycle
Example: If the vehicle was programmed with a run time cycle of 15 minutes and the engine
was running (under a remote start) for 5 minutes (meaning there is 10 minutes left in
the run time cycle), LEDs #1 #2 and #3 would light up. LED #3 will turn itself off
when there will be 8 minutes or less left in the run time cycle.
Multi-Level Features (
Basic Features (press the
SHIFT LOCK: .......................................................................
SHIFT TRUNK:.....................................................................
SHIFT START/STOP............................................................
Multi-Car Operation (press the
SHIFT SHIFT
SHIFT SHIFT
SHIFT SHIFT
SHIFT SHIFT
P. 6
LED #1
1. flash
2. flash
flash
1. flash
2. X
1. flash
2. flash
1. flash
2. X
X
LED #1 will turn
itself off when ...
... the cycle will
have ended.
... the cycle will ... 7 minutes into
have ended.
... the cycle will ...11 minutes into
have ended.
... the cycle will
have ended.
... the cycle will
have ended.
... the cycle will
have ended.
default state)
button 1X)
SHIFT
button 2X)
SHIFT
LOCK
UNLOCK
START/STOP
TRUNK
LED #2
1. flash 1.
2. X 2.
flash
1. flash 1.
2. X 2.
1. flash 1.
2. flash 2.
1. flash 1.
2. X 2.
X
Table 5
LED #2 will turn
itself off...
... 2 minutes into ... 1 minutes into
the cycle.
... 5 minutes into
the cycle.
... 7 minutes into
the cycle.
... 15 minutes
into the cycle.
... 19 minutes
into the cycle.
... 23 minutes
into the cycle.
Table 6
aux 2
status request
cold weather
:......................... 2
:..................... 2
: ............... 2
: ....................... 2
LED #3 LED #4
flash 1. flash
X 2. X
flash flash
flash 1. flash
X 2. flash
flash 1. flash
X 2. X
flash 1. flash
flash 2. X
X X
LED #3 will turn LED #4 will turn
itself off ...
the cycle.
... 3 minutes into
the cycle.
... 4 minutes into
the cycle.
... 10 minutes ... 5 minutes into
into the cycle.
... 13 minutes ... 7 minutes into
into the cycle.
... 16 minutes ... 9 minutes into
into the cycle.
nd car lock
nd car unlock
car start/stop
nd
car trunk
nd
Beep(s)
continuous
continuous
continuous
continuous
continuous
continuous
itself off...
-
the cycle.
the cycle.
the cycle.
the cycle.
the cycle.
User Guide