2 x = Doors intrusion
3 x = Shock Sense
4 x = Hood
The alarm diagnostic by LED projects a LED flash sequence immediately after disarming and will
remain in that state of alarm memory until the ignition is turned ON.
Diagnostics – Chirps Table
Chirps
•
•
1
•
•
•
2
•
•
•
3
•
•
•
4
•
•
5
•
•
Constant
up to 60 sec
P. 16
Doors locked, alarm and starter kill armed.
LOCK confirmation.
Entering mode 1 in the programming centre.
Disarmed notification
Doors unlocked, alarm and starter kill disarmed.
Transmitter programmed.
Entering mode 2 in the programming centre.
LOCK and arm while a zone is left unprotected.
Entering mode 3 in the programming centre.
Door zone left unprotected.
UNLOCK and disarm: an intrusion was detected (in warning chirps mode or full chirps
mode).
Entering tach-programming mode.
Entering mode 4 in the programming centre.
Siren or horn chirp timing adjustment
In siren or horn mode: alarm condition generated by an intrusion, by panic mode or when
the system is powered up. The siren will sound for 60 sec.
5 x = Panic
6 x = Ignition
7 x = Trunk
Description
User Guide