Digital Audio Processor (Optional); Operating The Digital Audio Processor (Optional) - Alpine DVA-5200 Owner's Manual

Operating the digital audio processor (optional)

ENTER
A.PROC
BAND
36
RETURN
Item
PARAMETRIC- Adjust the parametric equalizer's band frequency,
EQ band width and level.
SURROUND Select one of six surround modes according to the
music source using DSP (digital signal processing).
PRIVATE- Store and recall up to six parametric equalizer
MEMORY adjustments and settings.
TIME- Eliminate time delays resulting from the distance
CORRECTION between the listening position and the speakers.
DOLBY Switch between the Dolby Digital input and the Pro
SURROUND Logic input.
MODE
ADJUST Adjust the speaker mode, speaker level, etc.
MODE Adjust the volume, fader, balance, etc.
Operating the
digital audio
processor (optional)
When used with a digital audio processor (PXA-
H510), operation is possible from the remote
control unit included with the DVA-5200. Also
refer to the PXA-H510's operating instructions.
During playback, press
"A.PROC".
The setting menu appears.
Use the " 8 " or " 9 " key
to make the selection,
then press "ENTER".
For the procedure after making a
selection, refer to the pages
indicated on the table below.
Description
DVD
Video CD
CD
A.PROC
or
ENTER
See
page
P37
P38
P39
P41
P41
P42
P49