Alpine DVI-9990R Owner's Manual
  1. Manuals
  2. Brands
  3. Alpine Manuals
  4. Car Receiver
  5. DVI-9990R
  6. Owner's manual
Alpine DVI-9990R Owner's Manual

Alpine DVI-9990R Owner's Manual

Dvd audio/video tuner
Hide thumbs Also See for DVI-9990R:
Table of Contents

Advertisement

Quick Links

Download this manual
PHONES
(044) 360-7-130
(050) 336-0-130
(063) 788-0-130
(067) 233-0-130
(068) 282-0-130
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in
Kyiv and other cities, delivery by ground and postal services. Our experienced
consultants will provide you with exhaustive information and help you to chose
the very particular thing. We are waiting for you at the address
http://130.com.ua
Internet store of
autogoods
ICQ
294-0-130
597-0-130
SKYPE
km-130

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVI-9990R and is the answer not in the manual?

Questions and answers

Related Manuals for Alpine DVI-9990R

Summary of Contents for Alpine DVI-9990R

  • Page 1 Internet store of PHONES (044) 360-7-130 294-0-130 autogoods (050) 336-0-130 597-0-130 (063) 788-0-130 SKYPE (067) 233-0-130 km-130 (068) 282-0-130 CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories | CAR AUDIO —...
  • Page 2 DVI-9990R DVI-9990R Autogood products internet store http://130.com.ua...
  • Page 3 FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK DVI-9990R DVD-Audio/Video Tuner • OWNER'S MANUAL Please read before using this equipment. • BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes.
  • Page 4 Der CHA-S634 ist ein Hochleistungs-Wechsler für 6 CDs mit dem neuen M-DAC, mit CD-R/RW- und MP3- Wiedergabefunktion und mit CD-TEXT. Der CHA-1214 ist ein Ai-NET-Modell für 12 CDs. Changeurs de CD Alpine : vous avez le choix! Plus de sélections musicales, plus de souplesse, plus de confort.

  • Page 5: Table Of Contents

    Contents WARNING ............ 3 Playing still frames (pausing) ....36 CAUTION ............. 3 Frame-by-frame playback ..... 36 PRECAUTIONS ........... 4 Slow motion playback ......37 Discs playable on this unit ......6 Searching by title number ...... 38 Using This Manual ........8 Searching by group number ....
  • Page 6 Operating the Monitor/TV Tuner Setting daylight saving time ....85 (sold separately) ......113 Changing the picture output ....85 Operating for the DVI-9990R ..114 TUNER Setup Operating the Navigation TUNER Setup Operation ....... 86 (sold separately) ......116 Setting the sound quality of the tuner ...

  • Page 7: Warning

    Failure to do so may cause personal injury or damage to the product. Return it to your YOU CAN STILL HEAR OUTSIDE NOISE authorized Alpine dealer or the nearest WHILE DRIVING. Alpine Service Centre for repairing. Failure to do so may result in an accident.

  • Page 8: Precautions

    If you have problems, do not attempt to outside edge of the disc with a ballpoint pen repair the unit yourself. Return it to your or other such instrument, then insert the disc Alpine dealer or the nearest Alpine Service again. Station for servicing. Centre Hole...
  • Page 9 Installation Location Make sure the DVI-9990R will not be installed in a location subjected to: Disc Accessories There are various accessories available on the •...

  • Page 10: Discs Playable On This Unit

    Discs playable on this unit Playable Discs Discs that cannot be played The discs listed below can be played on this DVD-ROMs, DVD-RAMs, DVD + Rs, DVD + unit. RWs, CD-ROMs (excluding MP3/WMA files), photo CDs, etc. Max. Mark (logo) Recorded Disc size content...
  • Page 11 MP3 ID3 Tag/WMA Tag Information: The on this unit. DVI-9990R read and displays MP3 ID3v1 tag or WMA tag information. MP3 files created with * This product incorporates copyright protection ID3v2 tag information can be played back but the technology that is protected by method claims of tag info cannot be read or displayed.

  • Page 12: Using This Manual

    Using This Manual This document describes the direct operation of the DVI-9990R and its operation using the supplied remote control (RUE-4197). When using the remote control, change the position of the switch on the rear side of the remote control, to “H/U”.

  • Page 13: Basic Operation

    Basic Operation When operating the DVI-9990R with the supplied remote control, change the position of the switch on the rear side of the remote control to “H/U”. POWER SOURCE/POWER Detaching the Front Panel Press and hold SOURCE/POWER for more than 3 seconds to turn off the power.

  • Page 14: Attaching The Front Panel

    Basic Operation POWER SOURCE/POWER Attaching the Front Panel The following operation is performed from the main unit. First, insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. Push the left side of the front panel until it locks firmly into the main unit.

  • Page 15: Initial System Start-Up

    RESET switch Turning Power On or Off The power of the DVI-9990R cannot be switched on unless the Multimedia Manager (PXI- H990), sold separately, or a DAC unit (DAI-C990), sold separately, is connected. Refer to the user manual supplied with the PXI-H990 for operating the separately sold multi media manager (PXI-H990).

  • Page 16: Adjusting The Volume/Balance (Between Left And Right)/Fader (Between Front And Rear)/Defeat

    Basic Operation VOLUME MUTE Rotary encoder Adjusting the Volume/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat It is first necessary to set the speaker if combining with the Multimedia Manager (PXI-H990). Refer to “Setting the Speakers” in the PXI-H990 Owner’s Manual. Press Rotary encoder repeatedly to choose the desired mode.

  • Page 17: Lowering Volume Quickly

    SETUP button until the desired multi function mode is displayed. • DVD PLAYER DVD PLAYER SEARCH M.I.X. FOL. REPEAT FOL. SCAN • Depending on the DVI-9990R mode, it is not necessary to change the multi function mode page. Autogood products internet store http://130.com.ua...

  • Page 18: Playback

    SOURCE SOURCE/POWER DISC IN indicator Playback Insert a disc with the label side facing up, toward the center part of the slot. DVD PLAYER 00’16 –28dB The disc will be pulled into the unit automatically. The DISC IN indicator will light up and the playback will begin.
  • Page 19 AUX IN of the AUX IN/S-IN setup operation on the TMI-M990. ∗2: AUX is displayed in the DVI-9990R if AUX ON is set in the AUX setup operation in the Multimedia Manager (PXI-H990, sold separately). ∗3: Only when the changer is connected.

  • Page 20: Scanning Programs

    Multi function buttons 1 to 3 ANGLE SUBT. FUNC indicator Scanning Programs Press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the multi function mode is displayed. Each time this is pressed, SCAN mode toggles between on Press multi function (SCAN) within 5 and off.

  • Page 21: Random Play)

    M.I.X. (Random Play) Press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the multi function mode is displayed. Each time this is pressed, M.I.X. mode toggles between on and off. Press multi function (M.I.X.) within 5 sec- onds and the M.I.X.

  • Page 22: Repeat Play

    Multi function buttons 1 to 3 AUDIO FUNC indicator Repeat Play During playback, press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the Each time this is multi function mode is displayed. pressed, REPEAT mode toggles between on and off.
  • Page 23 <During changer mode> “Multi function (ONE)” (RPT): Only a track is repeatedly played back. “Multi function (DISC)” ( RPT): A disc is repeatedly played back. “Multi function (OFF)”: REPEAT mode off. Autogood products internet store http://130.com.ua...

  • Page 24: Mp3/Wma

    MP3/WMA SOURCE SOURCE/POWER DISC IN indicator Playing MP3/WMA Files Insert a disc containing an MP3/WMA file with the label side facing up, toward the center part of the slot. The disc will be pulled into the unit automatically. The DISC IN indicator will light up and the playback will begin.
  • Page 25 BAND to display the AUX source set in the AUX IN of the AUX IN/S-IN setup operation on the TMI-M990. ∗2: AUX is displayed in the DVI-9990R if AUX ON is set in the AUX setup operation in the Multimedia Manager (PXI-H990, sold separately).

  • Page 26: Selecting Folders

    MP3/WMA MENU SETUP 1( ) 2(ENT) ENTER/ Joystick 5( ) Multi function buttons 1 to 3 Selecting Folders Press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the multi function mode is displayed. Press multi function (FOL.

  • Page 27: Folder/File Search

    Folder/File Search You can search through folders and files on a disc and playback the result. During MP3/WMA playback, press any one of • Remote control operation the multi function buttons 1 to 3. while viewing the monitor The FUNC indicator switches off, and the (sold separately).

  • Page 28: Scanning Programs

    MP3/WMA Multi function buttons 1 to 3 ANGLE FUNC indicator SETUP • Scanning Programs Press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the Each time this is multi function mode is displayed. pressed, SCAN mode toggles between on and off.
  • Page 29 If you find a track that you want to hear, press any one of the multi function buttons 1 to 3 within 5 seconds. The track playback continues. <During MP3 compatible changer mode> 1)Press any one of the multi function buttons 1 to 3.

  • Page 30: Random Play)

    MP3/WMA Multi function buttons 1 to 3 AUDIO FUNC indicator SUBT. SETUP • M.I.X. (Random Play) Press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the multi function mode is displayed. Each time this is pressed, M.I.X.

  • Page 31: Repeat Play

    Repeat Play During playback, press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the multi function mode is displayed. Each time this is pressed, REPEAT mode changes. Press F SETUP within 5 seconds. •...
  • Page 32 MP3/WMA <During MP3 compatible changer mode> “Multi function (ONE)” (RPT): Only a file is repeatedly played back. “Multi function (FOLDER)” ( RPT): Only files in a folder are repeatedly played back. “Multi function (DISC)” ( RPT): A disc is repeatedly played back. “Multi function (OFF)”*: Repeat play is cancelled and return to normal playback.

  • Page 33: Supplementary Information

    This page includes supplementary information for pages 20 to 28. Supplementary Please refer to these pages. information TITLE Description Related page Playing MP3/WMA If you press TITLE during MP3/WMA playback, you can Files display the file name, folder name and tag information etc.. Page 20 For more information, refer to “Displaying the Title/Text”...

  • Page 34: Dvd Audio/Dvd Video/Video Cd

    DVD Audio/DVD Video/Video CD When viewing DVD Audio/DVD Video/Video CD, a monitor (sold separately) is required. If a separately sold monitor other than the TMI-M990 is connected, the settings in “Changing the picture output” on page 85 must be made. Multi function buttons 1 to 3 1( ) 4( )

  • Page 35: Dvd Menu

    • If a menu screen appears DVD-A DVD-V Video CD On DVDs and video CDs with playback control (PBC), menu screens may appear automatically. If this happens, perform the operation described below to start playback. DVD menu When the FUNC indicator lights up red, press 1 ( ), 5 ( ), 3 ( ), 4 ( ) and 2 (ENT) to finalize menu items.

  • Page 36: Display The Top Menu Screen

    DVD Audio/DVD Video/Video CD Display the top menu screen DVD-A DVD-V The top menu screen is displayed for multiple title DVD video or multiple group DVD audio. You can select and playback your favorite title or group from the top menu screen. In DVD Audio, when “VIDEO”...

  • Page 37: Display The Menu Screen

    Display the menu screen DVD-V For DVD videos with multiple menus, apart from the main feature, a menu screen for special features is displayed. The following operation is performed from the main unit. During DVD mode, press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the multi function mode is displayed.

  • Page 38: Stopping Playback

    DVD Audio/DVD Video/Video CD Stopping playback DVD-A DVD-V Video CD The following operation is with the supplied remote control. Press twice during playback. “STOP” is displayed, and playback stops. • Playback starts from the beginning when is performed pressed while playback is stopped. DVD PLAYER STOP DVD–V...

  • Page 39: Finding The Beginnings Of Chapters Or Tracks

    Release to return to normal play- back. * When “AUDIO” or “VIDEO” is set in the DVD setup. Refer to “DVD audio playback settings” (page 81). • No sound is played during fast-forwarding/fast- reversing. • No subtitles are shown during fast-forwarding/fast- reversing.

  • Page 40: Playing Still Frames (Pausing)

    DVD Audio/DVD Video/Video CD Playing still frames (pausing) DVD-A DVD-V Video CD During playback, press once. Press to resume playback. • No sound is played during the still frame mode. • The image or sound may stop temporarily when playback starts from the pause mode. This is not a malfunction.

  • Page 41: Slow Motion Playback

    Press to resume normal playback. • No sound is played during frame-by-frame playback. Slow motion playback DVD-V Video CD When is pressed and held in while in the pause mode, the 1/8th speed slow motion playback mode is set. When held in for 5 more seconds, the slow motion speed switches to 1/2 the normal speed.

  • Page 42: Searching By Title Number

    DVD Audio/DVD Video/Video CD ENTER Searching by title number DVD-V Use this function to easily find positions on the DVD using the DVD’s title. The following operation is performed with the supplied remote control. When the playback stops, input the number of the title you want to play using the number buttons (0 to 9).

  • Page 43: Searching By Group Number

    Searching by group number DVD-A Use this function to easily find positions on the DVD using the DVD’s group. The following operation is performed with the supplied remote control. When the playback stops, input the number of the group you want to play using the number buttons (0 to 9).

  • Page 44: Chapter/Track/Title Repeat Playback

    DVD Audio/DVD Video/Video CD Multi function buttons 1 to 3 AUDIO FUNC indicator SETUP • Chapter/Track/Title repeat playback DVD-A DVD-V Video CD Use this function to play the disc’s titles, chapters or tracks repeatedly. The operation can be • During playback, press any one of the multi switched for DVD function buttons 1 to 3.
  • Page 45 Select the required repeat type within 5 seconds by using any one of the multi function buttons 1 to 3. <DVD-V> ONE (Chp RPT): The chapter is played repeatedly. TITLE (Title RPT): The title is played repeatedly. OFF: The mode returns to normal playback.

  • Page 46: Playing Back The Tracks Out Of Sequence (M.i.x.)

    DVD Audio/DVD Video/Video CD Multi function buttons 1 to 3 ANGLE SUBT. FUNC indicator Playing back the tracks out of sequence (M.I.X.) DVD-A When “AUDIO” is set in the DVD setup during DVD audio mode. Refer to “DVD audio playback settings”...

  • Page 47: Playing Back A Track's Intro Only (Scan)

    Playing back a track’s intro only (SCAN) DVD-A When “AUDIO” is set in the DVD setup during DVD audio mode. Refer to “DVD audio playback settings” (page 81). Press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the Each press switches the multi function mode is displayed.

  • Page 48: Next/Previous Page

    DVD Audio/DVD Video/Video CD Multi function buttons 1 to 3 FUNC indicator SETUP • AUDIO Next/previous page DVD-A When “VIDEO” is set in the DVD setup during DVD audio mode. Refer to “DVD audio playback settings” (page 81). During playback, press any one of the multi function buttons 1 to 3.

  • Page 49: Switching The Audio Tracks

    Switching the audio tracks DVD-A DVD-V Video CD During playback, for DVDs with multiple audio soundtracks or languages recorded on them, the language can be changed. DVD Audio and DVD video can be operated from the main unit. During playback, press any one of the multi function buttons 1 to 3.

  • Page 50: Switching The Angle

    DVD Audio/DVD Video/Video CD MENU Multi function buttons 1 to 3 SETUP ENTER/ Joystick TOP.M/ DISP FUNC indicator SETUP • ANGLE SUBT. Switching the angle DVD-A DVD-V On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.

  • Page 51: Switching The Subtitles (Subtitle Language)

    Switching the subtitles (subtitle language) DVD-A DVD-V With DVDs on which multiple subtitle languages are recorded, the subtitle language can be switched during playback; moreover, subtitles can be hidden. In DVD Audio, when “VIDEO” is set in the DVD setup during DVD audio mode. Refer to “DVD audio playback settings”...

  • Page 52: Displaying The Disc Status

    DVD Audio/DVD Video/Video CD TITLE Displaying the disc status DVD-A DVD-V Video CD You can display and check the status of a DVD video disc (title number, chapter number etc.), a DVD audio disc (group number, track number etc) or a video CD (track number etc.) being played on a monitor.
  • Page 53 Current group TV system (NTSC) number Current operation mode Current subtitle language Group playback time Current angle (Elapsed time) number Current track <An example of a DVD Audio display> number Audio recording system Current audio language Repeat setting (Repeat is set to off in initial settings) •...

  • Page 54: Supplementary Information

    DVD Audio/DVD Video/Video CD The following pages include supplementary information for pages 30 Supplementary to 49. Please refer to these pages. information TITLE Description Related page Playing DVD Audio/ Play Position Memory Function: DVD Video/Video This function remembers the last position on the disc before the unit power or the Ignition switch was turned OFF or the source was changed.
  • Page 55 Playing DVD Audio/ A separately sold DVD player or DVD changer cannot be Page 30 DVD Video/Video connected to the DVI-9990R. If a DVD Audio disc (AUDIO mode*) is inserted, disc repeat is initialized. Page 30 * When “AUDIO” is set in the DVD setup during DVD audio mode.
  • Page 56 DVD Audio/DVD Video/Video CD The following pages include supplementary information for pages 30 Supplementary to 49. Please refer to these pages. information TITLE Description Related page Searching directly This function cannot be used on discs on which no chapter Page 39 by chapter or track numbers are recorded.
  • Page 57 TITLE Description Related page Switching the angle Some time may be required for the angle to change. Page 46 Depending on the disc, the angle may switch in one of two ways. -Seamless: The angle switches smoothly. Page 46 -Non-seamless: When the angle is switched, a still picture is displayed first, after which the angle switches.

  • Page 58: Radio

    BAND to display the AUX source set in the AUX IN of the AUX IN/S-IN setup operation on the TMI-M990. ∗2: AUX is displayed in the DVI-9990R if AUX ON is set in the AUX setup operation in the Multimedia Manager (PXI-H990, sold separately).

  • Page 59: Manual Storing Of Station Presets

    Press repeatedly until the desired tuning mode. DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning).

  • Page 60: Automatic Memory Of Station Presets

    Radio Multi function buttons 1 to 3 Preset buttons (1 through 6) Automatic Memory of Station Presets The following operation is performed from the main unit. After selecting the desired band, press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the multi function mode is displayed.

  • Page 61: Tuning To Preset Stations

    Tuning to Preset Stations The following operation is performed from the main unit. After selecting the desired band and when the FUNC indicator is red, press the Preset button that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected.

  • Page 62: Rds

    1/AF SETUP • Setting RDS Reception Mode and Receiving RDS Stations The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme.
  • Page 63 Press 1/AF again to deactivate the RDS mode. Press F SETUP, the FUNC indicator lights up • red and the mode changes to normal mode. • For the operation of “Receiving RDS Regional (Local) Stations” and “PI SEEK setting”, see TUNER Setup, page 86-88.

  • Page 64: Recalling Preset Rds Stations

    Preset buttons (1 through 6) T.INFO SETUP • Recalling Preset RDS Stations The following operation is performed from the main unit. Press F SETUP and the FUNC indicator lights up green. • Press 1/AF to activate the RDS mode. Press F SETUP until the FUNC indicator lights up red.

  • Page 65: Receiving Traffic Information

    If the preset station and the stations in the AF list cannot be received: When the PI SEEK setting is on (refer to “PI SEEK setting” on page 88), the unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset no.

  • Page 66: Pty (Programme Type) Tuning

    T.INFO 3/PTY SETUP • PTY (Programme Type) Tuning Press F SETUP and the FUNC indicator • lights up green. Press 3/PTY to activate the PTY mode, while the unit is in Radio (FM receiving) mode. The programme type of the station being currently received will be displayed for 5 seconds.

  • Page 67: Receiving Traffic Information While Playing Cd Or Radio

    Press 3/PTY within 5 seconds after selecting the programme type to start searching for a station in the selected programme type. The chosen programme type display blinks during searching and lights when a station is found. If no PTY station is found, “NO PTY” will be displayed for 5 seconds.

  • Page 68: Priority Pty (Programme Type)

    TITLE 2/P.PTY SETUP • Priority PTY (Programme Type) This function allows presetting of a programme type such as music category, news, etc. You can listen to a programme in the preset programme type as the unit automatically gives priority to the preset programme type when it begins broadcasting, and interrupts the programme you are currently listening.

  • Page 69: Displaying Radio Text

    Press 2/P.PTY to activate the PRIORITY PTY mode again. To change the programme category, perform the step 3. To disable the PRIORITY PTY function, press and hold 2/P.PTY for at least 2 seconds. • In the PRIORITY PTY function, unlike in the T.INFO function, the volume does not increase during operation.

  • Page 70: Other Functions

    Other Functions TITLE Displaying the Title/Text It is possible to display the Disc/Station on the display if the title has been previously inputted. For details, see “Titling Discs/Stations” (page 68). Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc.
  • Page 71 MP3/WMA mode (No Tag information present) Display folder/file number/elapsed time Display folder name Display time Display file name DVD Audio mode Display group number/track number/elapsed time Display time DVD Video mode Display time Display title number/chapter number/elapsed time Video CD mode Display track number/elapsed time Display time Tuner mode (MW, LW)

  • Page 72: Titling Discs/Stations

    Other Functions Multi function buttons 1 to 3 1( ) 4( ) 2(ENT) 5( ) SETUP 3( ) • Titling Discs/Stations It is possible to title your favorite CD or radio stations. You cannot input titles on MP3/WMA or DVD discs. The following operation is performed from the main unit.
  • Page 73 Press 1 ( ) or 5 ( ) and input the character or symbol you want. Press 3 ( ) or 4 ( ), the input writing position moves left or right. Step 5 to 7 can be repeated up to a maximum of 31 characters. Press 2 (ENT), to save title to memory and exit the title entry mode.

  • Page 74: Erasing Disc Titles/Station Titles

    Other Functions TITLE 1( ) 2(ENT) Multi function buttons 1 to 3 SETUP • 5( ) Erasing Disc Titles/Station Titles You can delete stored radio stations, CD and CD changer titles with this function. (The explanation here is an example of “Deleting a radio station title”). The following operation is performed from the main unit.

  • Page 75: Blackout Mode On And Off

    Press 1 ( ) or 5 ( ) to search for the title name to delete. Press 2 (ENT). The title is deleted. • If you press 6 (RTN), the title is not deleted and the title delete mode is cancelled. Press any one of the multi function buttons 1 to 3, and the mode returns to the normal mode.

  • Page 76: Supplementary Information

    Other Functions The following pages include supplementary information for pages 66 Supplementary to 71. Please refer to these pages. information TITLE Description Related page Displaying the Title/ About “Title” and “Text” Text Title: With this device, it is possible to input the CD/Station name (refer to page 68-69).
  • Page 77 TITLE Description Related page Titling Discs/ If you try to store beyond the limit, the front panel display Stations will show “FULL DATA”. At this point, no more titles can be Page 68 stored. Up to 50 titles can be added, including radio station names Page 68 and CD titles.

  • Page 78: Setup

    For details on each setting, refer to each item respectively. Perform the DVD setup operation after playback has stopped (STOP). If the DVI-9990R is in any other state other than being stopped, then the operation will not be received. The operation can also be performed by using the supplied remote control while looking at a monitor (sold separately).
  • Page 79 <DVD setup standard operation> The following operation is performed with the supplied remote control. Press and hold MENU/SETUP for more than 3 seconds. Move the joystick up or down, select DVD setup, and press ENTER. The mode changes to DVD setup mode. SETUP GENERAL SETUP TUNER SETUP...

  • Page 80: Setting Of The Menu Language

    Setup Before performing each setting, please refer to “DVD ENTER setup menu chart” on page MENU SETUP 74 and “DVD setup standard operation” on page 75. Setting of the menu language Set the language used for the menus (title menu, etc.). GROUP: LANGUAGE Setting item:...

  • Page 81: Changing The Country Code Setting

    [ To play in a language other than those displayed ] Select [CODE] on step 5 of the standard DVD setup on page 75, and perform the following operation after pressing ENTER. 1) Press the number buttons (0 to 9) to input a 4 digit language number. Find language numbers in the “List of language codes”...

  • Page 82: Setting Of The Rating Level (Parental Lock)

    Setup ENTER Before performing each setting, please refer to “DVD setup menu chart” on page MENU SETUP 74 and “DVD setup standard operation” on page 75. Setting of the rating level (Parental Lock) You can restrict access for children etc. to movies you don’t want them to see. The Parental Lock feature must be supported by the DVD you are watching for this feature to work.

  • Page 83: Changing The Password

    [ Changing the password ] 1) Press ENTER after selecting “Change Password” in step 2 of “Setting of the Rating Level (Parental Lock)”. 2) Enter a 4 digit password by pressing 0 to 9. 3) Press ENTER to confirm the entered password. 4) When setting is complete, press and hold MENU/SETUP for at least 3 seconds.

  • Page 84: Changing The Tv Screen Settings

    Setup Before performing each setting, please refer to “DVD setup menu chart” on page 74 and “DVD setup standard operation” on page 75. Changing the TV screen settings Use the procedure described below to set the output screen according to the type of TV monitor being used.

  • Page 85: Dvd Audio Playback Settings

    DVD audio playback settings DVD-A GROUP: DVD PRIORITY Setting item: AUDIO/VIDEO AUDIO: Cuts out the output from image data, and only allows sound data to be output. The sound output has better quality and is full of presence. VIDEO: Sound and images are output, the same as with DVD video.

  • Page 86: General Setup

    Setup 1( ) 2(ENT) ENTER/ Joystick MENU SETUP 5( ) SETUP • GENERAL Setup Operation The following steps 1–6 are standard operations for the GENERAL setup. Refer to the GENERAL setup menu chart for group selection in step 3, and setting items for step 4. For details on each setting, refer to each item respectively.
  • Page 87 <GENERAL setup standard operation> Press and hold F SETUP for more than 3 • seconds. Press 1 ( ) or 5 ( ), select the GENERAL setup and press 2 (ENT). The mode changes to GENERAL setup mode. Press 1 ( ) or 5 ( ), select the required group from the GENERAL setup mode, and press 2 (ENT).

  • Page 88: Changing Lighting Color

    Setup After setting, press and hold F SETUP for • more than 3 seconds. The unit returns to normal mode. Before performing each setting, please refer to “GENERAL setup menu chart” on page 82 and “GENERAL setup standard operation” on page 83. Changing lighting color You can change the color of the button illumination with this function.

  • Page 89: Setting The Date

    V OUTPUT Setting item: S-VIDEO/COMP. S-VIDEO: Set if connecting to a monitor (sold separately by Alpine) with a S picture input terminal. A high resolution picture will be output. COMP.: Set when connecting to separately sold monitors that do not have a S video input terminal.

  • Page 90: Tuner Setup

    Setup 1( ) 2(ENT) ENTER/ Joystick MENU SETUP 5( ) SETUP • TUNER Setup Operation The following steps 1–6 are standard operations for the TUNER setup. Refer to the TUNER setup menu chart for group selection in step 3, and setting items for step 4. For details on each setting, refer to each item respectively.
  • Page 91 <TUNER setup standard operation> Press and hold F SETUP for more than 3 • seconds. Press 1 ( ) or 5 ( ), select the TUNER setup and press 2 (ENT). The mode changes to TUNER setup mode. Press 1 ( ) or 5 ( ), select the required group from the TUNER setup mode, and press 2 (ENT).

  • Page 92: Setting The Sound Quality Of The Tuner

    86 and “TUNER setup standard operation” on page 87. Setting the sound quality of the tuner The DVI-9990R incorporates the MAX TUNE Pro for the highest quality tuner audio. Moreover, you can choose between 3 settings to suit your own personal sound preferences and usage.

  • Page 93: Supplementary Information

    For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the Page 80 disc’s cover.) • The contents of the DVI-9990R display and the separately sold monitor are different. Autogood products internet store http://130.com.ua...

  • Page 94: Changer (Optional)

    Changer (Optional) If you connect a Ai-NET/IONBUS converter (KCI-500B) (sold separately) and a changer, then they can be operated from the main unit. SOURCE SOURCE/POWER Multi function buttons 1 to 3 1 to 6 SETUP • Controlling CD Changer (Optional) Press SOURCE/POWER to activate the CHANGER mode.
  • Page 95 Select folder number (when connected with a MP3 compatible changer). 1Press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the multi function mode is displayed. 2Press either multi function (FOL. ) or multi function (FOL.

  • Page 96: Dab (Optional)

    DAB (Optional) SOURCE BAND SOURCE/POWER BAND Using DAB Receiver for the Ensemble Seek Tuning (Optional) DAB (Digital Audio Broadcasting) offers excellent sound quality even in a moving vehicle, enabling you to receive various types of information, including weather and traffic information, and it also displays information sent from the broadcasting stations.

  • Page 97: Autogood Products Internet Store Http://130.Com.ua

    If you press and hold while receiv- ing DAB1, 2, or 3, it starts searching for ensemble automatically. By selecting the mode in the “Changing the Display Mode” (page 104), the display shows the status of the broadcasting stations that have been received as follows: Press and hold Channel No.

  • Page 98: Changing The Service

    DAB (Optional) Multi function buttons 1 to 3 SETUP • Changing the Service Services are received within the ensemble that you are currently receiving. While receiving the ensemble, momentarily press , and select the service that you desire. The selected service label is displayed for 2 seconds, and then you return to the display that you select with the steps described under the section “Changing the Display Mode”...

  • Page 99: Changing The Service Component

    Changing the Service Component When listening to an Audio Service that has Secondary Service Components, you can change Audio Services of the Service Component between the Primary and Secondary. The following operation is performed from the main unit. Press any one of the multi function 1 to 3. The FUNC indicator switches off, and the multifunction mode is displayed.

  • Page 100: Memorizing The Service

    DAB (Optional) BAND BAND Preset buttons (1 through 6) Memorizing the Service Select the service that you want to memorize. Press any one of the Preset buttons (1 through 6) for at least 2 seconds while the FUNC indicator lights red. To memorize more, repeat the above steps 1 and 2.

  • Page 101: Receiving The Memorized Service

    Receiving the Memorized Service Press BAND to select your desired band. Press one of the Preset buttons (1 through 6) while the FUNC indicator lights red. The selected service is received. By selecting the mode in the “Changing the Display Mode” (page 104), the display shows the status of the broadcasting stations that have been received as follows: Channel No.

  • Page 102: Memorizing The Ensemble Automatically

    DAB (Optional) Multi function buttons 1 to 3 Memorizing the Ensemble Automatically The following operation is performed from the main unit. After selecting your desired BAND, press any one of the multi function 1 to The FUNC indicator switches off, and the multifunction mode is displayed. Press multi function (A.MEMO) within 5 seconds.
  • Page 103 Component Label Display: the Ensemble Label is displayed for 2 seconds, then the Service Label is displayed for 2 seconds, and then the display is changed to the Component Label after receiving the broadcasting station. Dynamic Label Display: the Ensemble Label is displayed for 2 seconds, then the Service Label is displayed for 2 seconds, and then the display is changed to the Dynamic Label after receiving the broadcasting station.

  • Page 104: Pty (Programme Type) Tuning

    DAB (Optional) 2(ENT) Multi function buttons 1 to 3 T.INFO 1( ) 5( ) SETUP • PTY (Programme Type) Tuning Press F SETUP and the FUNC indicator • switches off. Press any one of the multi function buttons 1 to 3. The FUNC indicator switches off, and the multifunction mode is displayed.

  • Page 105: Turning On/Off Traffic News Announcement

    Press 2 (ENT) to set the program type. After selecting a programme type, press any one of the multi function buttons 1 to 3. Press multi function (SEEK) within 5 seconds. The selected program type search starts. • To cancel the PTY SEEK mode during the PTY SEEK, press any one of multi function 1 to 3.

  • Page 106: Setting The Announcement Select Mode

    DAB (Optional) 1( ) T.INFO 2(ENT) 5( ) SETUP • Setting the Announcement Select Mode Press T.INFO for at least 2 seconds to turn ON the Announcement Select mode. Press F SETUP for more than 3 seconds. • Press 1 ( ) or 5 ( ), select “EX-BOX”, and press 2 (ENT).
  • Page 107 Press 1 ( ) or 5 ( ) to select your desired Announcement. Announcement → All Select → Traffic News → Travel News → Warning → News → Weather → Event → Special Event → Radio Info → Sports news → Financial news → Announcement Press 2 (ENT) to set ON/OFF for the selected Announcement.

  • Page 108: Changing The Display Mode

    DAB (Optional) 1( ) 2(ENT) TITLE 5( ) SETUP • Changing the Display Mode You can display information that is sent from broadcasting stations, such as the channel number or the service name that you are receiving or listening. The following operation is performed from the main unit. While receiving DAB, press TITLE to change the display mode.

  • Page 109: Receiving Announcement Information Of Dab Local Stations

    Receiving Announcement Information of DAB Local Stations The following operation is performed from the main unit. Press and hold F SETUP for at least 3 seconds. • Press 1 ( ) or 5 ( ), select “EX-BOX”, and press 2 (ENT). Press 1 ( ) or 5 ( ) to select “DAB REG”.

  • Page 110: Setting For Automatic Change From Dab To Rds

    DAB (Optional) 1( ) 2(ENT) 5( ) SETUP • Setting for Automatic Change from DAB to When the DAB reception is poor, you can set this selection ON to automatically change to the RDS station (a station that can be received) within the same broadcasting station until good reception is achieved.
  • Page 111 Press 2 (ENT) to select either ON or OFF. Press and hold F SETUP for at least 3 seconds to return to the normal • mode. • When reception is being changed from DAB to RDS, the DAB indicator blinks. Autogood products internet store http://130.com.ua...

  • Page 112: Setting On/Off For Drc (Dynamic Range Control)

    DAB (Optional) 1( ) 2(ENT) 5( ) SETUP • Setting ON/OFF for DRC (Dynamic Range Control) If you set this ON when receiving the sound of a wide Dynamic Range, the DRC (Dynamic Range Control) gain increases when the source sound is small, and the DRC (Dynamic Range Control) gain decreases when the source sound is large, making the Dynamic Range narrower to give you better and more comfortable sound even in the vehicle that produces a large noise.
  • Page 113 Press 2 (ENT) to select either ON or OFF. Press and hold F SETUP for at least 3 seconds to return to the normal • mode. • When a radio programme is set to ON, sound other than what you previously set may be produced depending on the broadcast.

  • Page 114: About The Monitor Display

    D V D P L A Y E R M P 3 M P 3 Folder name : ALPINE : ALPINE Folder Folder display : ALPINE _ F1 : ALPINE _ F1 File File : AGK _ OM Album File name 000’ 13” : AGK...

  • Page 115: Dvd Audio/Dvd Video/Video Cd

    (Example of an FM Radio screen) Information FM-1 FM-1 : ALPINE : ALPINE : News : News R. TEXT 78.8 P-SET Freq ALPINE World News RADIO TEXT Information Information VOL. -28dB 0 : 14 VOL. -28dB AP 0 : 15 Preset Preset FM-1 Station Info.

  • Page 116: Remote Control Operation

    Remote Control Operation Remote Control Notes on Using Remote Control Point the remote control transmitter at the remote control sensor. Remote control sensor • Point the remote control at the remote sensor within about 2 meter. When connected to the TMI-M990, if the remote control is pointed towards the remote control sensor of the TMI-M990, the operation will be received in the same way.

  • Page 117: Operating The Monitor/Tv Tuner (Sold Separately)

    Operating the Monitor/TV Tuner (sold separately) If the monitor (TMI-M990) or the TV tuner (TUE-T152), (both sold separately by Alpine) are connected, the supplied remote control can also operate these products. The only TV monitor that can be operated by the supplied remote control is the TMI-M990.

  • Page 118: Operating For The Dvi-9990R

    Remote Control Operation Operating for the DVI-9990R Set the mode selector switch to “H/U” to perform operations on the DVI-9990R. DVD Audio mode (when video/audio is output): Page Select (UP) Buttton. 4 POWER Button Turns the power on/off. Button Radio mode:...
  • Page 119 DVD Video/Video CD mode: j MODE Change Switch By pressing and holding for at least 2 seconds, the video screen and Sets to “H/U” to operate the DVI-9990R. playback status screen change. Sets to “TV MONI.” to operate a separately sold TV monitor.

  • Page 120: Operating The Navigation (Sold Separately)

    After pressing the MODE button, the following buttons will be pressed while the status indicator is blinking: numerals (0-9), DEL. and +10. w Mode change switch Set this switch to the “NAV.” side to operate a connected Alpine navigation system. Autogood products internet store http://130.com.ua...

  • Page 121: Information

    It is must also have a DTS sound track. compatible with audio signals from mono (1 The DVI-9990R has a built-in DTS 2- channel) all the way up to 5.1-channel channel audio decoder. Analog audio surround sound.

  • Page 122: List Of Language Codes

    Information List of language codes (For details, see pages 76.) Abbreviation Code Language Abbreviation Code Language Abbreviation Code Language 6565 Afar 7369 Interlingue 8278 Kirundi 6566 Abkhazian 7375 Inupiak 8279 Romanian 6570 Afrikaans 7378 Indonesian 8285 Russian 6577 Amharic 7383 Icelandic 8287 Kinyarwanda...

  • Page 123: List Of Country Codes

    List of country codes (For details, see page 77.) Abbreviation Code Country Abbreviation Code Country Abbreviation Code Country 6568 Andorra 6877 Dominica 7573 Kiribati 6569 United Arab Emirates 6879 Dominican Republic 7577 Comoros 6570 Afghanistan 6890 Algeria 7578 Saint Kitts and Nevis 6571 Antigua and Barbuda 6967...
  • Page 124 Information List of country codes (For details, see page 77.) Abbreviation Code Country Abbreviation Code Country Abbreviation Code Country 8069 Peru 8374 Svalbard and Jan Mayen 8487 Taiwan, Province of China 8070 French Polynesia 8375 Slovakia 8490 Tanzania, United Republic of 8071 Papua New Guinea 8376...

  • Page 125: About Dvds

    About DVDs Music CDs and DVDs have grooves Moreover, DVDs offer a variety of (tracks) in which the digital data is functions. recorded. The data is represented as • Multiple audio* (page 45) microscopic pits recorded into the Movies can be recorded in up to eight track –...

  • Page 126: About Mp3/Wma

    Information user's manual for that software. About MP3/WMA MP3/WMA files that can be played back by this device have the file extension CAUTION “mp3” / “wma”. Files with no extension Except for private use, duplicating cannot be played back. (WMA ver. 7.1 and audio data (including MP3/WMA data) 8 are supported) or distributing, transferring, or copying...
  • Page 127 Media supported The media that this device can play back are CD-ROMs, CD-Rs and CD-RWs. Root folder Corresponding File Systems This device supports discs formatted with ISO9660 Level 1 or Level 2. Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory).

  • Page 128: In Case Of Difficulty

    The remote control does not Module. work. - Allow enough time for the • If the DVI-9990R does not respond condensation to evaporate (about 1 when buttons are pressed on the remote hour). control, then check the switch on the Disc insertion not possible.
  • Page 129 Picture is unclear or noisy. solve the problem, consult your • Disc is being fast-forwarded or fast- nearest ALPINE dealer. reversed. MP3 or WMA is not played back. - The picture may be slightly disturbed, but this is normal.
  • Page 130 3 seconds. DISC ERROR • Mechanism error. 1) Press and eject the CD. If not ejecting, consult your Alpine dealer. 2) When the error indication remains after ejecting, press again. If the error indication still does not turn...
  • Page 131 1) Press and eject the disc. If not ejecting, consult your Alpine dealer. - Remove the disc by the following: 2) When the error indication remains after 1) Press for at least 3 seconds.
  • Page 132 ERROR - 01 - Wait until the temperature of the • Malfunction in the CD Changer. processor is lowered. - Consult your Alpine dealer. Press the magazine eject button and pull out the SYSTEM ERROR BUS System Error ! magazine.

  • Page 133: Specifications

    Specifications FM TUNER SECTION Tuning Range 87.5 – 108.0 MHz 9.3 dBf (0.8 µV/75 ohms) Mono Usable Sensitivity 13.5 dBf (1.3 µV/75 ohms) 50 dB Quieting Sensitivity Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 80 dB Stereo Separation 45 dB Capture Ratio 2.0 dB MW TUNER SECTION...
  • Page 134 Information GENERAL Power Requirement 14.4 V DC (11–16 V allowable) Maximum Pre-Output Voltage 5 V/10 k ohms ±14 dB at 60 Hz Bass ±14 dB at 10 kHz Treble Weight 1.6 kg (3lbs. 8 oz) CHASSIS SIZE Width 178 mm (7") Height 50 mm (2") Depth...
  • Page 135 Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave., Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-0000 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München,...

Table of Contents