Changing The Tv Screen Settings - Alpine DVA-5200 Owner's Manual

SET UP

Changing the TV screen settings

0
ENTER
28
9
–
SET UP
RETURN
Changing the TV
screen settings
Use the procedure described below to set
the output screen according to the type of
TV monitor being used.
Select "TV SCREEN" under
"Changing the default settings
(SET UP)" on page 26.
Use the " 8 " or " 9 " key to make
the selection, then press
"ENTER".
or
Select this when connected to a conventional
4:3 size (normal TV aspect ratio) monitor.
There may be black stripes visible at the top
and bottom of the screen. The width of these
stripes will depend upon the original aspect
ratio of the theatrical release of the movie.
4 : 3 PAN SCAN
Select this when connected to a conventional
4:3 size monitor. The picture will fill the entire
TV screen. However, due to the mismatch in
aspect ratio, parts of the movie at the extreme
left and right sides will not be visible.
ENTER