Video Output On/Off - Alpine DVA-5200 Owner's Manual

Displaying the
disc status
Use the procedure described below to display
the status (track number, etc.) of the currently
playing video CD or music CD on the screen.
During playback, press
"DISP".
The playback status is displayed.
TV system (NTSC or PAL)
Current track
number
Note: For music CDs, the playing status is
displayed even when "DISP" is not pressed.
Press "DISP" again.
Playback control (PBC)
ON/OFF (For video CDs only)
Repeat setting (Default setting-disc repeat)
Press "DISP" once more
to turn the display off.
Displaying the disc status
Video CD
CD
DISP
Operating mode
DISP
DISP

Video Output ON/OFF

Video Output ON/OFF
(Only when CVA-1005 is connected)
When this unit is used with the CVA-1005
+ the TME-M750 (Extra Monitor for Rear
Seat), the DVD video can be viewed
independently of what's being viewed on
the CVA-1005.
Press "FUNC" on the
Remote Control while the
DVA-5200 is OFF and the
CVA-1005 is ON.
The DVD's video will be output to
the Rear Monitor regardless of
what's being viewed on the CVA-1005. It
will continue to play even when the CVA-
1005 source is changed. The RCA
connectors mounted just above the
Remote Eye input at the rear of the unit,
may be used to feed audio to the Rear
Monitor or separate Rear audio system.
Note: This output is at a fixed level and requires a
preamp with a volume control to adjust
listening levels.
FUNC
25