How To View The Display; Playback - Alpine EX-10 Owner's Manual

®
iPod
% SKIP ▲
/ENTER
% SKIP ▼
SOURCE
/
An iPod can be connected to the eX-10 by using the FULL SPEED™
Connection Cable (supplied).
When the eX-10 is connected by using the cable, the controls on the
iPod are not functional.
About iPods usable with this unit
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
First generation iPod classic : Ver.1.0.1
First generation iPod touch : Ver.1.1.1
Third generation iPod nano : Ver.1.0.1
Fifth generation iPod : Ver.1.2.1
Fourth generation iPod : Ver.3.1.1
iPod photo : Ver.1.2.1
Second generation iPod nano : Ver.1.1.3
First generation iPod nano : Ver.1.3.1
iPod mini : Ver.1.4.1
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or the iPod nano only. However,
future generation iPod compatibility cannot be guranteed.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
6
-EN

How to View the Display

<iPod screen display example>
LIST
LIST
1 Mode display
2 Song title/Episode title/Audiobook title
/
3 Album title/Podcast title
FUNC.
4 Artist title/Release date
VIEW
5 Artwork
6 Elapsed time
7 Remaining time for playing
8 FM transmitter frequency display/"AUX" display
• Only alphanumeric characters can be displayed.
• The maximum number of characters is 128 (128 byte).
• Some characters may not be correctly displayed.
• If there is no tag information, or there is character information that is
not supported by the unit, nothing is displayed.
• If a song includes cover art data, etc., you can display it during
playback. Note that while artwork data is being downloaded (max. 6
seconds), no operation can be performed. Elapsed playing time is
also not displayed. If you want to display artwork automatically, set
to Auto in "Setting Artwork Download (Artwork Display)"
(page 16). 2 seconds after playback of a song has started, artwork
data automatically starts downloading. If the artwork type is set to
"Song" in "Setting Artwork Type (Artwork Type)" (page 16), data
downloading is carried out every time a new song is selected.

Playback

1
2
3
• If a song is playing on the iPod when it is connected to the eX-10, it
will continue playing after the connection.
• For an iPod, if shuffle/repeat is set, even if the iPod is connected to
the unit and shuffle/repeat mode is changed, the iPod will return to
the original mode when it is removed.
1
5
6
Press SOURCE to switch to the iPod mode.
Slide the LIST switch in the direction of
.
Return to the beginning of the current song:
Slide the LIST switch in the direction of
Fast backward:
Slide and hold the LIST switch in the direction of
Advance to the beginning of the next song:
Slide the LIST switch in the direction of
Fast forward:
Slide and hold the LIST switch in the direction of
To pause playback, press
Pressing / again will resume playback.
2
3
4
7
8
or
.
.
.
.
/ .