Mounting The Microphone; Connecting The Cigarette Adapter To The Cigarette I/F Box; Installing The Stand Using Screws Fixed; How To Remove The Fuse - Alpine EX-10 Owner's Manual

5
Connect the stand to the monitor cable.
6
Attach the monitor to the stand as shown in step 1.
Use the cable clamps to fix the cables.
• Before using, check that the monitor and stand assembly is mounted
securely at the chosen mounting location.
• Do not adjust the angle of the monitor with excessive force.

Mounting the Microphone

For the sake of safety, mount the microphone in the following location.
• In a stable and secure location.
• In a location that does not inhibit safely driving the vehicle.
• Mount the microphone in a location where the driver's voice can
easily be picked up.
Choose a location for the microphone that can easily pick up the drivers
voice. Requiring the driver to move towards the microphone for
audibility causes a distraction that could be dangerous.
Connecting the Cigarette Adapter to the
Cigarette I/F Box
If the cigarette adapter is directly connected:
Cigarette I/F Box
If the cigarette adapter is connected using the cigarette
adapter extension cable:
Cigarette I/F Box
Threaded Types
• Install the cigarette I/F Box:
Install the cigarette I/F Box in a safe location using the supplied
Velcro Fasteners (2 pieces).
20
-EN
Cigarette Adapter
Cigarette Adapter
Extension Cable
Cigarette Adapter

Installing the Stand using Screws fixed

1
Remove the bottom cover from the stand by turning
it in the direction of the arrow mark.
Stand Bottom Side
2
Attach the bottom cover using the supplied screws.
3
Attach the stand by turning it to the direction arrow
marks until it locks.

How to remove the Fuse

The fuse (2A) is built into the cigarette adapter.
1
Remove it by turning
(Threaded Type)
2
Remove the projection part.
3
Remove the fuse.
Bottom Cover
Stand
Bottom Cover