TRENDnet TEW-714TRU User Manual page 46

TEW-714TRU User's Guide
TX Power : Wireless signal transmission power.
Set transmission power to appropriate
value to avoid wireless interference� The
default value is 100%. Valid settings are
between 1 and 100 (%).
Short Preamble : Select a short or long preamble. For
optimum performance it is recommended
to also configure the client device to the
same preamble type.
Short Slot : Enable Short Slot Time to increase
performance if you do not have 802.11b
clients
Tx Burst : Condense transmission in a short period
of time or not. It is energy saving to
condense transmission, but it may cause
jitter or delay in real-time communication.
Packet Aggregate : Combine short packets and send them
together. Enabling packet aggregate will
increase data throughput. However, it
may cause jitters or delays in real-time
communication.
Apply :
Click this button to apply the change
Cancel : Click this button to abandon the change
© Copyright 2013 TRENDnet. All rights reserved.
Advanced Settings
44