TRENDnet TEW-714TRU User Manual page 31

TEW-714TRU User's Guide
WPS
WPS is the simplest way to connect a wireless client to the TEW-
714TRU. You don't have to select the encryption mode and fill in a
long encryption passphrase every time you try to setup a wireless
connection. You only need to press a button on both the wireless client
and the TEW-714TRU, and the WPS will do the rest for you�
© Copyright 2013 TRENDnet. All rights reserved.
WPS Config
Choose Enable or Disable and then click Apply to enable
or disable WPS functionality. The default setup is enabled.
WPS Summary
This summary shows WPS settings of TEW-714TRU. You
can generate a new AP PIN by click Generate� Or, you can
click Reset to change the WPS settings back to default.
WPS Progress
The TEW-714TRU supports two types of WPS: WPS via
Push Button and WPS via PIN code. If you want to use
the Push Button, you have to push a specific button on
the wireless client or in the utility of the wireless client to
start the WPS pairing. Make sure you select Push Button
Configuration , and then click the Apply button in this
section to start WPS pairing.
If you want to use the PIN code, you have to know the PIN
code of the wireless client and switch it to WPS mode,
then fill-in the PIN code of the wireless client in the PIN
text field. Select PIN and then click Apply�
WPS Status
The WPS status window shows the WPS actions the TEW-
714TRU is taking. It's shown here for trouble shooting
purpose.
System Configuration
29