TRENDnet TEW-714TRU User Manual page 40

TEW-714TRU User's Guide
System
This page allows you to do basic system management, upgrade
firmware, restart system and reload factory defaults.
Reset to Factory Default
Click Load Default Settings to reload factory defaults to
the TEW-714TRU. Always load factory defaults after you
upgrade to a new firmware.
Import Settings / Export Settings
Click Export to save your TEW-714TRU system settings.
Choose a previous saved file by clicking Select File and
then click Import to load your previous settings.
© Copyright 2013 TRENDnet. All rights reserved.
Upgrade Firmware
TRENDnet may periodically release firmware upgrades
that might add features or fix problems associated with
your TRENDnet model and version. To find out if there is a
firmware upgrade available for your device, please check
your TRENDnet model and version using the link�
http://www.trendnet.com/downloads/
1� If a firmware upgrade is available, download the
firmware to your computer.
2� Unzip the file to a folder on your computer.
3� Log into the TEW-714TRU
4� Click on Advanced and then System
5� Click Browse��� and navigate to the folder on your
computer in which the unzipped firmware file (.bin) is.
6� Located and select it the firmware file.
7� Click Apply�
8� After system reboot, comeback to the same page reset
your settings to default again.
Import Settings / Export Settings
Click Logout to leave the web management page.
Advanced Settings
38