4.7 Top Cover
CN1
Installing the Top Cover
Install the top cover with the display assembly according to the following procedures and
Figures 4-18, 4-19.
1.
Seat the top cover, adjusting its position.
2.
Secure the top cover with M2x4 white flat head screw.
3.
Connect the touch pad board flat cable from CN12, Finger print cable from CN916
MMB board flat cable from CN3 and power board flat cable from CN1.
Turn the computer upside down and secure it with the twenty screws.
Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual
CN3
M2x4 white flat screw
CN12
Figure 4-19 Removing the Top Cover
4 Replacement Procedures
CN916
4-31