Toshiba Satellite A300-ST3511 Maintenance Manual page 160

4 Replacement Procedures
4. Remove the HDD pack by pulling on the tab attached to the pack, following the
direction of the arrows.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble
or replace the HDD pack only if it fails.
5. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x3.5
black flat head screws.
6. Place the HDD pack on a flat surface (such as a desk), and remove the chassis.
M3x
Main HDD
CAUTION: Do not apply pressure to the top or bottom of the drive.
4-16
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200
3.5 -
black flat head screw
Figure 4-8 Removing the HDD chassis
Main HDD chassis
3.5 -
M3x black flat head screw
4.2 HDD
Maintenance Manual