Display Mask; Removing The Display Mask - Toshiba Satellite A300-ST3511 Maintenance Manual

4 Replacement Procedures

4.15 Display Mask

Removing the Display Mask

Remove the display mask according to the following procedures and Figure 4-33, 4-34.
1. Remove the following 6 seals on the display module in that order:
- Four black seals on the bottom
- Two black seals on the top
2. Remove the following 6 screws on the display module, in that order:
- Two M2.5x6 white flat head screws on the top
- Four M2.5x6 white flat head screws on bottom
3. Release the following 20 latches on the display mask, in that order:
- Seven bottom latches
- Five latches on each of the left and right sides
- Tour top latches
Seal
2.5
M
Display
4-50 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300
-
x6 White flat head screw
Figure 4-33 Removing the display mask
Seal
2.5 -
M x6 White flat head screw
4.15 Display Mask
Maintenance Manual
0