Odd Bay Module; Removing The Odd Bay Module - Toshiba Satellite A300-ST3511 Maintenance Manual

4 Replacement Procedures
4.3

ODD Bay Module

Removing the ODD Bay Module

NOTE: The installation and removal procedures are the same for all the modules that
can be installed in the ODD bay. See the appropriate sections for the disassembly
procedures of specific modules.
Remove the ODD bay module according to the following procedures and Figures 4-12.
1. Turn the computer upside down.
2. Remove the M2x5 white flat head screw.
3. Push out on the ODD bay module in the direction of the arrow.
CAUTION: Before removing ODD bay module, please remove HDD first to avoid ODD
shell break..
CAUTION: Handle the ODD bay module carefully it can become hot during operation.
ODD bay module
4-20
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200
-
M2x5 white flat head screw
Figure 4-12 Removing the ODD bay module
4.3 ODD Bay Module
Maintenance Manual