Setrcic Error Status - Fujitsu SPARC Enterprise M3000 Rci User's Manual

CHAPTER 4 Error Status
4.2

setrcic error status

When the RCI construction by the setrcic command ends abnormally and "Operation
failed error status: XX" is displayed, the displayed error status code and explanation
are described to the following table.
Code
-1
-2
-3
Note 1: After a certain period of time, re-execute the setrcic command. When this case
reappears, please contact our field engineer.
Note 2: Please contact our field engineer.
4-2
Detected an RCI transmission error.
Terminated the command execution due to RCI busy. (Note 1)
Internal error occurred in XSCF. (Note 2)
Explanation
C120-E360-06EN