To Confirm An Rci Replacement Setting - Fujitsu SPARC Enterprise M3000 Rci User's Manual

• To confirm an RCI replacement setting:

1
Execute the setrci (8) command to display the RCI status.
XSCF> setrci -c stat
HOST
address 000102ff
Active
LIST
address
000101ff OFF -
000102ff OFF -
003001ff OFF -
The command completed successfully.
Confirm that the displayed LIST contents include the replacement RCI host.
For details on LIST contents, see
C120-E360-06EN
pwr alm I/F sys-phase
ACT -
ACT -
ACT -
Chapter 3, "Command Reference."
2.6 RCI Setup for Replacement of an RCI Base Cabinet
ctgry dev-cls sub-cls tm-out
host 0001
host 0001
disk 0400
0b -
0b -
04 -
2-15