Rci Setup For Initial Installation; Rci Setup Flow; Confirming Rci Initialization; To Confirm Rci Initialization - Fujitsu SPARC Enterprise M3000 Rci User's Manual

CHAPTER 2 Setup of the RCI for Operation
2.2

RCI Setup for Initial Installation

This section explains the procedure for initial RCI setup, which assumes RCI settings
have not been configured.
Note:
2.2.1

RCI setup flow

RCI setup for initial installation contains the following steps:
1

Confirming RCI initialization

2 Connecting RCI cables
3
Making an RCI address setting
4 Making an RCI construction setting
2.2.2 Confirming RCI initialization
Before connecting an RCI cable to an RCI host, confirm that RCI settings have been
initialized.

• To confirm RCI initialization:

1
Execute the setrci (8) command to display the RCI status.
XSCF> setrci -c stat
HOST
address 000f7fff
Inactive
The command completed successfully.
Confirm that "address" is 000f7fff (initial address value).
If RCI settings have not been initialized, perform the next step.
2
Execute the setrci (8) command to initialize RCI settings.
XSCF> setrci -c init
The command completed successfully.
2-2
Perform this work when this system is not using any RCI I/O unit.
C120-E360-06EN