Adf Paper Chute Setting - Fujitsu M3093DE Operator's Manual

Pull up the ADF paper chute as follows:
• Hold the document cover with one hand and pull up the ADF
paper chute with the other hand until it clicks.
ADF paper chute
ADF paper chute
Shaft
Figure 4.3 ADF paper chute setting
Fan the documents as follows:
• Take a 15 to 20 mm thickness of documents. Lightly hold both
ends with both hands. Bend the documents into an arch as
shown below.
• Then hold the documents tightly with both hands, and
straighten the documents. The center of documents swell and
air is introduced between the documents.
• Repeat this operation two or three times.
• Turn the documents 90°, and repeat the operation again.
15 to 20 mm
Document cover
Push for storage
Document cover
4 – 7