Functions Of Each Part - Fujitsu M3093DE Operator's Manual

2.2.2 Functions of each part

Document cover:
Document bed:
Document holding pad:
Automatic document feeder (ADF):
Stacker:
Power switch:
Indicators:
ADF paper chute:
ADF lever:
Power inlet:
Interface connectors:
Third party slot opening:
Memory cover:
Address switch:
Closed over and holds a document to be
read.
A document to be read is placed on the
bed also called Flatbed (FB).
Presses a document to the document bed.
Automatically feeds documents to the
reading position.
Stacks the read documents.
Turns the power on or off.
These LEDs indicate the status of the
scanner.
Holds the documents to be fed by the
automatic document feeder.
Opens or closes the automatic document
feeder to remove documents jammed in
the feeder.
To be connected to an AC power outlet
with the power cable.
To be connected to the host system with
interface cables.
Reserved (M3093DE)
To be opened when installing or replac-
ing the memory option.
To be used for SCSI ID setting
2 – 3