Basic Product Specification - Fujitsu fi-4750L Operator's Manual
Image scanner
Hide thumbs
Also See for fi-4750L:
- Cleaning and maintenance (67 pages) ,
- Illustrated parts catalogue (25 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Basic Product Specification
o
Item
N
.
1
Operating method
2
Image sensor
3
Light source
4
Document
Size
5
Document Thickness
6
Optical Resolution
7
Output
Resolution *5
8
Grayscale level (internal)
9
Scanning
Speed
(Engine Speed)
Note *2
10
Halftone patterns
11
Capacity of ADF
12
Compression
13
Interface
Note *5
Notes*1: The details are described in chapter 4.
*2: The actual scanning speed might differ due to host computers' environment.
*3: The maximum number will differ due to the paper thickness. Refer to chapter 4.
*4: The scanning speed might be slow. The usage with NO COMPRESSION is recommended.
*5: Both SCSI-2 and the Third Party Slot can not be used at the same time.
*6: The Power consumption of the boards should be as follows:
- In the Low Power Mode:
- With IPC-4D option:
- Without IPC-4D option:
Specification
ADF (Duplex), Flatbed
CCD x2
Inert Gas (Xenon) Lamp x2
Minimum
A8 (Portrait)
Maximum
A3/11 x 17 in.
2
52 g/m
(14lb) to 127 g/m
400 dpi
Binary
100/150/200/240/300/400/600 dpi
100/150/200/240/300/400 dpi
Grayscale
100/150/200 dpi
1024 levels (10bit)
55ppm, 200dpi, A4, Portrait
Simplex
35ppm, 300dpi, A4, Portrait
45ppm, 300dpi, A4, Landscape
100ipm, 200dpi, A4, Portrait
Duplex
60ipm, 300dpi, A4, Portrait
80ipm, 300dpi, A4, Landscape
Dither/ Error diffusion
250 sheets (A4, 64 g/m
MH/MR/MMR
SCSI-2
Third Party Slot
Less than 0.35 A
Less than 1.5 A
Less than 3.0 A
Remarks
Front/Back
Green
2
(34lb)
Note *1
Simplex
Duplex
2
(17lb))
Note *3
Note *4
High Density
50-pin, Female
Note *6
5-1
Advertisement
Table of Contents
