3 At Screen A, if you want to let the offset
return to default, select "Yes" otherwise "No"
then press
. The scanner displays
Screen B.
4 At Screen B, press
or press
to decrease offset.
The increment or decrement is 0.5 mm.
Then press
to activate the setting. The
scanner displays Screen C.
5 At Screen C, press
or press
to decrease the offset. Then
press
to activate the setting. The
scanner displays the next item of the setup
mode.
to increase the offset
to increase the offset
<Screen B (Example of ADF Front Offset)>
<Screen B (Example of ADF Back Offset)>
<Screen B (Example of FB Offset)>
<Screen C (Example of ADF Front Offset)>
<Screen C (Example of ADF Back Offset)>
<Screen C (Example of FB Offset)>
7-9