Basic Product Specification - Fujitsu fi-4750C Operator's Manual

Basic Product Specification

o
Item
N .
1 Operating method
2 Image sensor
3
Light source
4 Document
Size
5 Document Thickness
6 Optical Resolution
7 Output
Resolution
8 Grayscale level (internal)
9 Scanning
Speed
(mechanical)
Note *2
10 Halftone patterns
11 Capacity of ADF
12 Compression
13 Interface
Note *6
Notes *1: The details are described in chapter 4.
*2: The actual scanning speed might differ due to host computers' environment.
*3: These speeds do not contain processing time at the host computer.
*4: The maximum number will differ due to the paper thickness. Refer to chapter 4.
*5: The scanning speed might be slow. The usage with NO COMPRESSION is recommended.
*6: Both SCSI-2 and the Third Party Slot can not be used at the same time.
*7: The Power consumption of the boards should be as follows:
- In the Low Power Mode: Less than 0.35 A
- With IPC-4D option:
- Without IPC-4D option:
ADF (Duplex), Flatbed
CCD x 2
LED Lamp x 2
Minimum A8 (Portrait)
Maximum A3/Double Letter
52 g/m 2 (14 lb) to 127 g/m
400 dpi
Binary 100/150/200/240/300/400/600/800 dpi
Grayscale 100/150/200/240/300/400/600 dpi
Color 100/150/200/240/300/400/600 dpi
1024 levels (10 bits)
White binary
Simplex
Unicolor binary
Color
White binary
Duplex
Unicolor binary
Color
Dither/Error diffusion
100 sheets (A4, 64 g/m
MH/MR/MMR
SCSI-2
Third Party Slot
Less than 1.5 A
Less than 3.0 A
Specification
2 (34 lb)
50ppm, 200dpi, A4, Portrait
35ppm, 300dpi, A4, Portrait
64ppm, 200dpi, A4, Landscape
36ppm, 200dpi, A4, Portrait
16ppm, 200dpi, A4, Portrait
90ipm, 200dpi, A4, Portrait
62ipm, 300dpi, A4, Portrait
114ipm, 200dpi, A4, Landscape
64ipm, 200dpi, A4, Portrait
24ipm, 200dpi, A4, Portrait
2 (17 lb))
Remarks
Front/Back
Green, Red, Blue
Note *1
Note *3
Note *4
Note *5
High Density (Half)
50-pin, Female
Note *7
5-1