Lexmark 10G1664 - T 634dtnf B/W Laser Printer Service Manual page 52

4060-xxx
User status messages
Formatting Flash
(Do Not Power Off)
Program Flash
(Do Not Power Off)
Formatting Disk
Programming Disk
(Do Not Power Off)
Menus Disabled
Activating Menu Changes
2-18
Service Manual
Status
The flash memory is being formatted.
The flash memory is being
programmed, which means fonts or
macros are being written to flash
memory.
The disk is being formatted.
The disk is being programmed, which
means fonts or macros are being written
to disk.
The printer menus have been disabled.
This occurs when Menu is pressed
while the printer is Ready and Menu
Lockout is active. The printer display
shows this message for one second and
then returns to the Ready message.
The printer is reset to activate a printer
setting changed in the menus.
Action
No button actions are possible while
this message displays.
Do not perform any button actions
while this message displays.
No button actions are possible while
this message displays.
No button actions are possible while
this message displays.
Note: If information is written to flash
memory and to disk at the same time,
the Program Flash message displays.
No button actions are possible while
this message displays.
No button actions are possible while
this message displays.