Installing Network Software Components - 3Com PC Card User Manual

16 C 3: W
HAPTER INDOWS
Installing Network
Software Components
Table 3 Adding Network Software Components
Type of Network
Microsoft Networking and Netware
Microsoft Networking (for Windows 95,
Windows NT, and Windows 98)
NetWare for Bindery (for NetWare 3.x and
NetWare 4.x in bindery mode)
NetWare Directory Services (NDS) (for
NetWare 4.x)
TCP/IP
(for UNIX® networking)
* Download software from the indicated manufacturer's BBS or World Wide Web site.
98
Upon rebooting, Windows 98 automatically detects the modem interface of the
card. See "Installing the Modem Interface" on page 17.
You will need to install four types of network components: Client, Adapter,
Protocol, and Service. These components are installed through the Network
application in the Control Panel. The Network window lists which network
components are currently installed.
Before installing network components, consult with your network manager or MIS
representative for the options you require for your network.
1 Open the Network window by double-clicking the Network icon in the Control
Panel.
2 Click Add to add new or additional network components.
Some networks do not require all four components. Table 3 shows which
components are required for four widely used network types.
Component
Adapter
Client
Protocol
Service
Client
Protocol
Client
Protocol
Service
Client
Protocol
Manufacturer
3Com
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Novell
Microsoft
Novell
Microsoft
Novell
Microsoft
Microsoft
Option to Select
3Com 10/100 LAN +
56K Modem CardBus PC
Card
Microsoft Client for
Microsoft Networks
NetBEUI
File and printer sharing
for Microsoft Networks
Microsoft Client for
NetWare Networks
IPX/SPX-compatible
Protocol
Microsoft Client for
NetWare Networks*
Novell NetWare 32-bit
Client*
IPX/SPX-compatible
Protocol*
IPX/SPX Protocol*
Service for NetWare
Directory Services*
Microsoft Client for
Microsoft Networks
TCP/IP