3Com PC Card User Manual page 13

Table 2 Adding Network Software Components
Type of Network
Microsoft Networking and Netware
Microsoft Networking (for Windows 95,
Windows NT, and Windows 98)
NetWare for Bindery (for NetWare 3.x and
NetWare 4.x in bindery mode)
NetWare Directory Services (NDS) (for
NetWare 4.x)
TCP/IP
(for UNIX® networking)
* Download software from the indicated manufacturer's BBS or World Wide Web site.
Before installing network components, consult with your network manager or MIS
representative for the options you require for your network.
1 Open the Network window by double-clicking the Network icon in the Control
Panel.
2 Click Add to add new or additional network components.
Some networks do not require all four components. Table 2 shows which
components are required for four widely used network types.
Component
Adapter
Client
Protocol
Service
Client
Protocol
Client
Protocol
Service
Client
Protocol
3 Each time you add one of these components, Windows 95 creates a new entry in
the Network window. As these components are added, you may be asked to
provide:
NetWare or Microsoft client software on hard disk, floppy disks, or CD
Windows 95 system installation files on hard disk, floppy disks, or CD
The Windows 95/98 Installation Disk that came with your LAN+Modem
card
Installing the Network Interface
Manufacturer
3Com
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Novell
Microsoft
Novell
Microsoft
Novell
Microsoft
Microsoft
9
Option to Select
3Com 10/100 LAN +
56K Modem CardBus PC
Card
Microsoft Client for
Microsoft Networks
NetBEUI
File and printer sharing
for Microsoft Networks
Microsoft Client for
NetWare Networks
IPX/SPX-compatible
Protocol
Microsoft Client for
NetWare Networks*
Novell NetWare 32-bit
Client*
IPX/SPX-compatible
Protocol*
IPX/SPX Protocol*
Service for NetWare
Directory Services*
Microsoft Client for
Microsoft Networks
TCP/IP